Search results

Search the forum Search Articles
  1. pinzmann

    GPS for measuring distance?

    I'm in the market for a new portable GPS. I would like to be able to measure straight line distances between two points. Right now I have an old Garmin 60cs that will go out to about 1k yds but then it converts over to tenths of a mile which is too coarse. Since I'm shooting farther now I'd like...
  2. pinzmann

    Rifle Scopes MOA Reticles

    Re: MOA Reticles S&B will have their MOA reticle out by the end of the year. Or so they say. Probably won't see them for a few months into next year.
  3. pinzmann

    MY FIRST GAP HAS ARRIVED

    Re: MY FIRST GAP HAS ARRIVED Great gun, Rommel. Now you'll have to bring it to our rifle matches at the 29Palms rifle range. I'd love to see it in action. First Sat of every month we have a fun match. PM me if you need any more info.
  4. pinzmann

    Rifle Scopes Need some advice on magnification to 1000 yards

    Re: Need some advice on magnification to 1000 yards I would go with the 6.5-20. 10x just doesn't cut it, especially if your shooting paper or small varmints.
  5. pinzmann

    Rifle Scopes IOR 6-24 , NF 5.5-22 or Vortex Razor HD5-20

    Re: IOR 6-24 , NF 5.5-22 or Vortex Razor HD5-20 Nightforce sounds like your best bet, although I myself am leaning towards the IOR scope. Have a few NF's but would like to try the new 6-24x56 scope.
  6. pinzmann

    Rifle Scopes Nightforce Reticles

    Re: Nightforce Reticles Their new ones are the velocity reticles. They won't be available until Jan.
  7. pinzmann

    Rifle Scopes poor man's MOA/MOA?

    Re: poor man's MOA/MOA? I have done it with my NF 5.5-22 scope. I just put up a MOA scale at exactly 100yds and lined up my reticle on it and by adjusting the power ring, set it to match the scale. Think it came out to 19-20X or so. Never really was a fan of FFP although my S&B is FFP.
  8. pinzmann

    Gunsmithing "The 338's are breeding me thinks" build thread(s)

    Re: "The 338's are breeding me thinks" build thread(s) You doing this manually or is the mill on a program?
  9. pinzmann

    Single load or magazine feed

    Re: Single load or magazine feed I'm going single feed on my new 338 LM for several reasons. Cheaper, no mags or bottom metal to buy Less chance of deforming the bullet tip You can seat to the lands without accounting for the mag length I don't need a fast reload for ELR I feel its...
  10. pinzmann

    New 338 LM build

    Re: New 338 LM build I initially checked it with a Go gauge and then run a new brass casing in to check for clearance. I always verify with the brass that I'm going to use. The two aren't always the same.
  11. pinzmann

    New 338 LM build

    Re: New 338 LM build Finally got started on the barrel. After threading Drilling out before chambering checking the runout after reaming out the chamber. had a little under .0002" checking the headspace with a piece of brass. I could just feel it start to compress the brass.
  12. pinzmann

    One Mile Match-Would you attend?

    Re: One Mile Match-Would you attend? I think I would like to try this also. Friend of mine would probably also interested.
  13. pinzmann

    Rifle Scopes Issue with a USO scope.

    Re: Issue with a USO scope. Knob is on the right side and it is marked left windage is counterclockwise, so it sounds like they got it reversed. I'll have the scope owner give USO a call tomorrow.
  14. pinzmann

    Rifle Scopes Issue with a USO scope.

    A friend just got a new USO scope, 3.8-22x56 with the EREK elev knob and a #3 windage, in mil. 35mm tube. He needed help setting it up, zeroing etc. All my experience with scopes has been MOA except for a couple in mil which I sold soon after. I understand perfectly mils just prefer MOA. I do...
  15. pinzmann

    Reloading storage cases for 338 LM

    Re: Reloading storage cases for 338 LM Thanks
  16. pinzmann

    Reloading storage cases for 338 LM

    Re: Reloading storage cases for 338 LM What brand of box do you get?
  17. pinzmann

    Reloading storage cases for 338 LM

    Just started reloading for my 338 LM. After my problem finding plastic cases for my 7mm short mag, thought I better check here. Who makes plastic ammo boxes for the 338? I'll be loading the 300gr Bergers and I would like to store them tip up. I prefer 50rd boxes but will take whatever's available.
  18. pinzmann

    What is your dream spotting scope? Why?

    Re: What is your dream spotting scope? Why? Any one with a MOA reticle. Except USO.
  19. pinzmann

    New 338 LM build

    Well, I finally got all my ducks in a row and ready to start building my 338 Lapua Mag. The final piece came in yesterday, Manners T4A stock. Now I can start machining the barrel. I am using: Manners T4A stock Krieger 30" #17 barrel with 1.3 breach and 1-9.3 twist Jewell tigger Stiller...
  20. pinzmann

    Gunsmithing DBM system recommendation for Stiller TAC30

    Re: DBM system recommendation for Stiller TAC30 The Alpha's would not work in my Manners T4-Stiller combo. When I switched back to AI mags they worked just find.
Top Bottom
Back
Home
Forums
Merch
Alerts