Search results

Search the forum Search Articles
  1. Q

    Accuracy International Picture Thread

    Everything he said sounds like he got the AXMC but getting it from the factory with a 308 barrel is special order
  2. Q

    Pelican Case with Folding Stock Rifle

    I would go shorter case and fold the stock. It's amazing the difference. I rarely use my storm 3300 anymore and it's only 10 inches longer. This is how I bring my ai around and can fit the 27 in with ai brake with a little extra room.
  3. Q

    Custom Cut Foam for Hard Rifle Case

    Closed cell foam is where it's at if you can get some. Stiffer and super easy to cut. I've done quite a few with only a pocket knife and a straight edge. I've also gone to a more simple straight lines cutting instead of trying to follow every curve of the rifle. Makes it a little easier and...
  4. Q

    Accuracy International Picture Thread

    So far my AXMC has been incredibly tolerant in 338. It's the only 338 I've had but when I first got it I shot some really "cheap" American eagle soft points 250 through it since I hadn't yet gotten dies and it shot that around 3/4 moa. I have only hand loaded since then but all the loads I...
  5. Q

    Rifle Scopes Parallax settings. Leave parallax alone for the whole stage?

    Not entirely sure but looking at his charts and assuming they are correct I would think it would half the worst case of each of so 4 in at 1000 and half an inch at 100. So maybe 1000 would be better from the pure math but the blurriness would probably be better at 500
  6. Q

    6.5 SP-10 Wait Time?

    Being in manufacturing. I would imagine the same level of care goes into each. These guys are putting together guns day in and day out.
  7. Q

    Competition worthy brass catcher for AR-15?

    I went for the operator model with the hinge. pretty sure it was the mid length
  8. Q

    Competition worthy brass catcher for AR-15?

    This is exactly what I thought at first. I'm pretty damn cheap and kept going back and looking at TBR and other options. Then one day I was trying to find damn creedmoor brass in the grass and said fuck it I'm buying one. I haven't lost a piece of brass since and use it on several rifles (6.5...
  9. Q

    Competition worthy brass catcher for AR-15?

    Depends on the definition of reasonably priced but I will recommend tactical brass recovery. They are pretty expensive but very well made and if you have any issues or jams it is easily pushed out of the way and also easy to show clear. Not sure which types of competitions you are shooting.
  10. Q

    NRL22 matches in West Virginia?

    Hey guys, Sorry to be the bearer of bad news but I am a member at the above club and unfortunately it is a member only match. We are pretty small and at this time cannot put on a public match due to space limitations and our agreement with the landowner. I do not think anything will be...
  11. Q

    AXMC won't extract

    My understanding is they are the repair center but warranty work has to go through AINA in Fredricksburg VA
  12. Q

    AXMC won't extract

    Hmmm. I guess a heat treat issue as mentioned in the other thread could be it too. I could see the tip of the extractor that would be closest to the shooter experiencing some wear from running the bolt and it getting a little shorter causing it to have a hard time getting over the lip of the...
  13. Q

    AXMC won't extract

    how old is your rifle? Have you tried extracting unfired rounds before this? looks like the win mag bolt face? I had this issue with my 308 bolt and it turned out that the extractor groove was out of spec and I had to send it in to get a new bolt. Does it look like the back of the brass...
  14. Q

    Nordic Comp 22RB dedicated upper accuracy?

    Anyone have one of these that they have used in 22prl type events or just done some accuracy testing on with a magnified optic? Most reviews I see are more related to red dots and 3 gun training.
  15. Q

    Accuracy International AX small or large rifle firing pin?

    These are the part numbers that were thrown out there. 28340BL for Black 28340PB for Pal Brown Description - Bolt Assembly .308 WIN 1.6mm Firing Pin
  16. Q

    Accuracy International AX small or large rifle firing pin?

    I called mile high with a supposed part number for the axmc small firing pin bolt. The guy didn't know what I was talking about and it didn't come up in their system. He was supposed to check and get back to me but haven't heard anything. It is supposedly out there but cannot seem to get...
  17. Q

    Labradar Blue Tooth app is out

    Press the labradar icon in the top left or swipe from the left to get to the settings where you can change the units
  18. Q

    Labradar Blue Tooth app is out

    App working pretty solid on Android. Hopefully they add the ability to rename strings or add notes. Also exporting the data to Google drive or just the phone would be awesome.
  19. Q

    47chevycoe is gtg!

    Just completed a decent sized purchase from 47chevycoe. >2k. Communication was great, shipping was fast. Deal with confidence.
  20. Q

    Labradar Opinions

    I use exactly what dimar linked. It last quite a while for me. Usually I'm not chronoing for a whole range session but I can definitely run it for a few range sessions no problem.
Top Bottom
Back
Home
Forums
Merch
Alerts