Search results

Search the forum Search Articles
  1. jmorris

    Stainless tumbling options

    I built my own tumbler because the small batches out of the thumblers turned me off. The one I built was over 12 gallons. Others clean my brass for me these days but I have gathered up the materials to build a magnetic tumbler, it will be Jan before I have time to stick it together though.
  2. jmorris

    Home made Covert Case

    That way my first thought. Maybe you need a harbor freight box.
  3. jmorris

    And another. Home made casefeeder

    Some of the cases in that video are getting over cooked. You don't want the flame to change from blue to orange like that. This is what you want, flame stays blue throughout the process, even color all the way around the case and it is cool enough to hold right out of the flame. This one...
  4. jmorris

    And another. Home made casefeeder

    This is one I built using 100 lb chlorine buckets. One slips into the other for the drive. More pics of the build here. SST Photos by jmorrismetal | Photobucket
  5. jmorris

    And another. Home made casefeeder

    I built this one out of aluminum, it was a bullet collator in its first life. I just changed the exit and removed the agitators from the inside for collating pistol cases. I make pretty simple jigs to set the spacing of notches like these. Makes the job simple even with manual equipment.
  6. jmorris

    Home made reload/work bench

    I envy wood working guys. I am more of a metal fellow, this is what I came up with for my last one.
  7. jmorris

    Photos A REAL ONE FOR COMPARISON

    Yep, more than the border is absent for 3rd class.
  8. jmorris

    Annealing machine home build help, need servo/motor advice

    Yes, it is a DC motor you can get fancy controllers but on mine I just have a dash light dimmer knob out of an '86 RX 7 to adjust down the voltage from a 12v transformer for a dead answering machine.
  9. jmorris

    Annealing machine home build help, need servo/motor advice

    That one was likely my original build of this machine. The one above is a video a fellow sent me after he put one together using my "blade". This is the album on the build. Annealer Photos by jmorrismetal | Photobucket There are other machines built with the same part in this thread. Some...
  10. jmorris

    Annealing machine home build help, need servo/motor advice

    Best place to buy one is zorrotools.com This is about as simple as they get.
  11. jmorris

    Anyone Made A Moving Target?

    "Correct me if I'm wrong Sandy but if I kill all the golfers, they are going to lock me up and throw away the key." CS
  12. jmorris

    Anyone Made A Moving Target?

    These are videos of one I made with a cordless drill. Gives two speeds with the gearbox and two more with the groves machined into the pully that pulls the string. And used as moving "cover"
  13. jmorris

    Homemade Wet Tumbler

    Look at the first photo in post 37, the bucket in back with the lid, you can just make out the counter sunk screws that hold the 1/2"x2" plastic strips to the inside of the bucket.
  14. jmorris

    Homemade Wet Tumbler

    The best build thread for them is here. finished the auto annealer today The step by step photos of my first one can be found in the link of the first post. Lots of others have had clever designs in that thread as well.
  15. jmorris

    Homemade Wet Tumbler

    I had 10 pounds to start with. It's now at a friends house that uses it and cleans brass for me. This was the last (single) batch I picked up of more than 2000, 45 cases.
  16. jmorris

    Homemade Wet Tumbler

    One I built using 100 lb chlorine buckets. The one mounted to the face plate is just there to nest the other bucket into. 1000 .223 cases literally, is just a drop in the bucket. This is a little over 800 .223
  17. jmorris

    DIY target camera system

    I have used a camera I bought and used on my RC aircraft. The camera and TX are powered by a 9v battery (center of photo) the RX is powered by a 12v deer feeder batt and plugged into the kids DVD player.
  18. jmorris

    Auto culler for 45 ACP small primer brass

    Tired of working your fingers to the bone culliing small primer 45 brass from large, only to have one stop your reloading dead in it's tracks? Well, take a look at the innovative, new and improved, super, diet and patent pending, cull-o-matic. Ball point pen included. No brass was...
  19. jmorris

    Auto bullet sizer

    I had recycled some parts off of my auto bullet sizer but put it back together today and shot a short video of how it works. It uses the same gear motors as the bullet caster and auto reset rifle targets, so it is pretty slow but they were free and it runs by itself. Click photo to play video.
  20. jmorris

    Auto caster

    Thanks guys. Not sure how much stuff I have "invented" but I have learned all you need to have something is an idea or a photo and one of everything and time.
Top Bottom
Back
Home
Forums
Merch
Alerts