Search results

Search the forum Search Articles
  1. spife7980

    What just happened to Match primer prices.

    Ive noticed them getting cheaper myself
  2. spife7980

    Using Tape on the back of a loaded round to check or set headspace. . . .

    When I suggested it, it wasnt necessarily to see when ammo is too big, more of the opposite. Making sure the specific round youre about to fire off isnt going to be stretching longitudinally a gross amount if one gets impatient and shoots it before gauges arrive. I agree whole heartedly that its...
  3. spife7980

    6.5 creedmoor Headspace Gauge - 8 sites backordered?

    Worst case, take a factory round and add layers of scotch tape to the case head, see how many layers/how much length needs to be added to the case before it wont chamber.
  4. spife7980

    Reloading to accuracy on bolt action

    It is if you want your terminology to mean anything to anyone else.
  5. spife7980

    End of life barrels

    You can chase it a little bit, ultimately you do more chasing than actual shooting. It’s up to you to decide where that line is.
  6. spife7980

    223 Powder Issues

    Staball match is a newish temp stable ball powder, 50s are on the light end but will go bang.
  7. spife7980

    Bullet Lot variability question

    None of your concern chat bot
  8. spife7980

    Ballistic Subject Matter Expert needed

    This is more useless than the “not a hot dog” app No it cannot
  9. spife7980

    6BR Norma shooter needs help with hunting bullet selection.

    The eldx will be fine on hogs
  10. spife7980

    6.5 PRC Pressure signs

    OP, read this https://primalrights.com/information/understanding-pressure
  11. spife7980

    CCI 400 for 6BR class?

    The cdg will be just fine, it’s set up for high pressure already. All the arc actions are. Most customs. It’s mainly factory that is a concern.
  12. spife7980

    CCI 400 for 6BR class?

    Make sure you have a smaller .062 firing pin vs a larger .080, or at least a tight fitting pin the hole fitment. Helps the thinner small rifle primer material resist cratering and ultimately punctures.
  13. spife7980

    CCI 400 for 6BR class?

    Because the are thin cupped and not intended for as high of pressures. The br4 has the thicker cup material so it should be suitable. It’s not the brisance, it’s the ability to hold up to pressure after ignition I’m concerned with.
  14. spife7980

    CCI 400 for 6BR class?

    $0 hazmat right now https://www.brownells.com/reloading/components/primers/small-rifle-magnum-primers/?avad=74383_c42cca2e5&aid=56335&utm_medium=affiliate&utm_source=Avantlink&utm_content=NA&utm_campaign=56335&cm_mmc=affiliate-_-Itwine-_-Avantlink-_-56335 I wouldn’t shoot a 400 in a .478 bolt...
  15. spife7980

    Random copper 1/2-4/3 down the barrel

    Maybe clean the copper fouling?
  16. spife7980

    7 SWC for PRS

    They are advertising 2700 out of a 28” barrel
  17. spife7980

    Barrel Vise

    I thought I had pictures but I can’t find them, I use a viper on my 1.2 and -1.25 barrels and generally go to 80lbs but I’ve also maxed out the torque wrench at 100 and it held. The issue is factory barrel removal- but it’s gotten off the notorious howa… once I tightened the top clamp bolts down...
  18. spife7980

    Trigger options..... bix n andy triggertech diamond or timney hit

    The sear and pull weights play together- you need to find the right combination of adjustment to each to get the optimal trigger pull for your particular action. Generally the lighter the pull weight the more sear you will need to maintain fall safe. But too much sear leads to creep. Goldilocks...
  19. spife7980

    Solus Action Wrench

    Presss the Upgrade button
  20. spife7980

    Aero Solus Ejector Roll Pin Size?

    If you have box of assorted drill bits, you might be able to try those going flat end in (not cutting end) incrementally up in size and see where the pass fail size is. Get a pin one step above the last drill bit that goes in
Top Bottom
Back
Home
Forums
Merch
Alerts