Search results

Search the forum Search Articles
  1. Eric_F

    N140

    It's an MTU profile Bartlein.
  2. Eric_F

    N140

    I was surprised too. I only shot four of the N140 (Lab Radar only caught two), then I shot the Varget right after. But, here were the Varget velocities in order: 2879, 2889, 2894, 2901, 2906, 2909 Definitely speeding up, but I figured I was shooting too fast and heating up the barrel so I...
  3. Eric_F

    N140

    I've got some I've been testing in 6 BRA. Shot a ladder at 69 F a couple weeks ago, and 31.6 gr got me 2933 +/- 5 fps with 105 hybrids. Today at 34 F the same load was 2915 fps, so 0.51 fps/deg F. For comparison, 31.5 gr Varget was 2920 fps at 69 F, and 2885 fps at 34 F, so 1.0 fps/deg F.
  4. Eric_F

    Normal Headspace Expansion? - 300 WSM

    300 WSM doesn't have a belt, headspaces off the shoulder. 300 Win Mag does have a belt that it headspaces off of, but that still sounds like a ton. Have you checked your fired cases inside with a paperclip to see if there is case head separation starting?
  5. Eric_F

    6bra or 6 dasher

    I've had good accuracy from my 6BRA fireform loads. Occasionally I do feel the resistance in closing the bolt, which isn't bad but might make me nervous in a match. That inconsistency itself is actually most concerning to me, and could be perhaps from my cheap Lee Turret press. I worry a little...
  6. Eric_F

    Trimmer for .375 CT

    Do the 375 and 408 CT have the same shoulder? If so, the WFT Big Boy should work with this bushing: https://www.littlecrowgunworks.com/store1/408-Cheytac-p118340668
  7. Eric_F

    Where to buy Tikka Action

    This may still be for sale. As someone who failed to remove a factory Tikka barrel, I'd say the bare action here is a bonus. https://www.snipershide.com/shooting/threads/tikka-t3x-ctr-action-and-xlr-element-folding-chassis-fs.7029230/#post-8864121
  8. Eric_F

    6bra or 6 dasher

    See my reply above. The longer neck on BR and BRA gives a large window for seating depth to tune and chase lands while still having a good amount of the bearing surface in the neck.
  9. Eric_F

    6bra or 6 dasher

    BRA. Fireforming is super simple and benchrest guys think it produces more consistent brass than Dasher fireforming. Longer neck gives more flexibility for seating depth. I'm getting a really accurate node at 2920 fps with 105's from 31.5 gr Varget in a 26". That can be slightly beat by Dasher...
  10. Eric_F

    Official MDT 6BR Magazine Thread

    I've been using my MDT BR mags for 6 BRA with a Tikka and it's been great. The 12th round is tough to get in but it works.
  11. Eric_F

    Preferred barrel blanks (the company)

    https://pac-nor.com/barrel-weight-calculator/
  12. Eric_F

    Reloading Equipment SOLD: Little Crow Gun Works WFT 284 Win Gen 1

    If that's $55 shipped I'll take it.
  13. Eric_F

    Best d.i.y. option for brass annealing.

    That would work, I've seen similar setups. I'll just add the advantage to this over a drill and/or socket method is consistency. With the skip design or similar, the rotor speed sets the anneal time, and torch holder basically sets the heat applied. I use tempilaq to make sure it's adequate to...
  14. Eric_F

    Tikka TAC A1 Chassis

    I liked the Tac A1 chassis and mags when I used a friend's. I went with an AICS pattern chassis for my Tikka because I'm running a BR variant and wanted extended mags. The lack of BR kits and mag extensions is the only bummer about the CTR mags, but might be irrelevant based on how you use it.
  15. Eric_F

    Tikka TAC A1 Chassis

    It's not a barrel nut, just looks like one. Doesn't actually contact the barrel (just chassis to handguard), no modification needed. https://www.snipershide.com/shooting/threads/tikka-tac-a1-has-anyone-removed-one-from-chassis.6532455/ I've seen them go for around $600 a while back, but search...
  16. Eric_F

    straight walled cartridge options?

    Go 350 Legend or 450 Bushmaster. Factory ammo and guns available for both, and they're more than adequate inside 200.
  17. Eric_F

    Was looking for sage advice but I wound up here... Looking for new rifle for my nephew

    Without searching too hard, you could get this barreled action with a trigger and brake plus a Bravo for well under $2k, plus then you have a switchlug https://www.snipershide.com/shooting/threads/wts-wtt-relist-curtis-axiom-w-switchlug-and-6-5-cm-hawkhill-barrel.7004153/
  18. Eric_F

    Was looking for sage advice but I wound up here... Looking for new rifle for my nephew

    Bighorn Origin - $900 Prefit 6.5 CM Heavy Palma 26" - $500 KRG Bravo - $350 Trigger Tech Diamond - $250 Total $2000 Still missing a brake but you could get a JM for like $30. But honestly the best bet is to buy used in the PX here.
  19. Eric_F

    DIY sticky shooting bags

    Stretch thread might work, but could also allow the whole seam to stretch open, you would have to try it. The heavy duty sewing machine needle I used is advertised as a denim needle.
  20. Eric_F

    DIY sticky shooting bags

    I've been really liking the looks of the sticky pint sized GC and pump pillow but would rather put the funds towards guns. So I decided to try to make my own. I bought some 1000d cordura (Amazon), some Toughtek non slip fabric (Etsy, surprisingly, was...
    • Thread
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts