Search results

Search the forum Search Articles
  1. Eric_F

    DIY sticky shooting bags

    It's nothing special, a Brother brand a few years old my wife got for ~$100 on Craigslist. I got some heavier needles for it (I forget the kind but I'll post when I get home). I was also a little nervous about people saying you needed some beast of a sewing machine for 1000D but that's been...
  2. Eric_F

    6mm BRA

    The standard no turn seems to be a Wheeler #1 with a 0.272 neck. If you call JGS they'll have that. https://www.snipershide.com/shooting/threads/6mm-bra-info.6913947/post-7375330
  3. Eric_F

    Gunsmithing Barrel Vise and Action Wrench

    Agreed, not ideal to use that combination of vise and bushings. But I got a ton of torque out of it anyway, almost cracked my (cheap) work bench.
  4. Eric_F

    Gunsmithing Barrel Vise and Action Wrench

    I bought a lightly used Tikka T3x in stainless. Got a Wheeler #1 action wrench and had to buy longer bolts but it worked great. Bought a Wally Cooper barrel wrench with a variety of Al bushings off eBay. That didn't work at all, barrel kept slipping, so I bought the SAC tapered Tikka bushing...
  5. Eric_F

    Accessories WTB Tikka T3x Action Wrench

    https://www.ebay.com/itm/Action-Wrench-Tikka-T3-Rear-Entry/233505800717
  6. Eric_F

    Reloading Equipment SOLD 7mm RM brass, SOLD

    Sold.
  7. Eric_F

    Reloading Equipment SOLD 7mm RM brass, SOLD

    Bump, price drop
  8. Eric_F

    Optics NIB Athlon Ares ETR part number 212100B.

    I'll take it. PM inbound.
  9. Eric_F

    Reloading Equipment SOLD 7mm RM brass, SOLD

    Bump up
  10. Eric_F

    Reloading Equipment SOLD 7mm RM brass, SOLD

    I've got 148 once fired 7mm Rem Mag brass cases, Remington (R-P) brand for sale. Cleaned and deprimed. Looking for $70 shipped OBO.
  11. Eric_F

    Reloading Equipment Free .284 168gr mk

    I'll take them if Todd doesn't.
  12. Eric_F

    Gunsmithing Freebore needed for 115dtac dasher

    Again I'm not sure. You could probably calculate where the base would end up given the DTAC tip to 0.242" ogive distance is 0.64" and the overall length is 1.295": https://www.6mmbr.com/DTAC115hbc.html That means a 0.125" fb and 0.060" jump would put the base at: 1.295 - 0.64 - 0.125 + 0.060 =...
  13. Eric_F

    Gunsmithing Freebore needed for 115dtac dasher

    I'm not sure on freebore, but this shows pretty well that the DTAC performs best with a significant jump (0.060" - 0.080") in a variety of cartridges https://precisionrifleblog.com/2020/04/05/bullet-jump-load-development-data/
  14. Eric_F

    Reloading Equipment Found please delete

    If you use code Cambridge here: https://ceproducts.shop/collections/featured-products/products/fx-120i-reloading-scale-122g-x-0-001g You can get an FX120i for $500 shipped.
  15. Eric_F

    Suppressors Ultra 7 10.5oz Heavy after 28k rounds of 6.5 CM

    I'd bet a power supply like this connected to a peristaltic pump like this would recirculate solvent nicely for about $40. You would likely have to upgrade to an Arduino if you want periodic pumping or spraying.
  16. Eric_F

    Sidearms & Scatterguns Help with a 12 ga auto

    Clamps work of course, but the forend is pretty long especially on the Comp. I like it positioned there, but you'll have to see what feels right.
  17. Eric_F

    Sidearms & Scatterguns Help with a 12 ga auto

    The Hayes custom guns look set up for 3 gun, and >$1600. Nice looking of course, but if you're looking for HD and range toy, go with the factory. I haven't modified the loading port on my Comp and quad load fine. Not competitive in 3 gun really, but the loading port isn't what's holding me back...
  18. Eric_F

    Sidearms & Scatterguns Help with a 12 ga auto

    Good call on the 1301T, I'm sure you'll both love it. I've got the Comp, that thing is super light and soft shooting. Theres a local girl who just rocks 3 gun with one too. My buddy's Versa Max was really soft shooting too, but was heavy as hell and swumg slow, wouldn't recommend it for a...
  19. Eric_F

    3-5 rnd Cartridge loops

    That's enough of a niche thing I think you would have to have it custom made. If you send me $40 and dimensions of the velcro section I'd make one for you. Some shooting bags I made here: https://www.snipershide.com/shooting/threads/diy-sticky-shooting-bags.6945275/
  20. Eric_F

    Reloading Equipment SOLD- Harrell 6mm BRA die

    I'll take it.
Top Bottom
Back
Home
Forums
Merch
Alerts