Search results

  1. S

    Butler creek caps for leupold vx-6 3-18x50

    This is want you need. not Butler Creek! https://aadmount.com/products/caps_vx6_50?_pos=1&_sid=67f6af516&_ss=r
  2. S

    Sidearms & Scatterguns 4" Glock 10MM

    The SAS Sig P229C's (Compacts) are a full size 229 frame with P224 slide (3.5" barrel). Both in .357 sig & .40 cal barrels, drop-in conversion. HK P2000SK (subcompact) in .357 Sig. M&P 10 mm, 4.25" Colt Delta Elite, commander size.
  3. S

    Glock / Barrel / Opinion of

    The barrel hood lugs need to be adjusted with a square file. Mark the lugs with Dykem or red sharpie, insert the barrel in the slide and use your thumb to push the barrel up into the breech until it is flush (if you can) ; remove the barrel and examine where the witness marks are on your Dykem...
  4. S

    Buffer weight and spring for suppressed 12.5" AR-10?

    Consider ditching the buffer & spring system. Using a JP captured spring system in 14" Knights SR-25 ACC suppressed.
  5. S

    Precision Rifle Gear One Hundred Concepts Large Objective Scope Cap Feedback

    I have a bunch of ARD's and scope covers; favorite designs are Tenebraex and John Aadland's. I would like to see a hybrid of their design concepts wherein one does not need to screw the ARD into the scope threads that usually accommodate sunscreen extensions etc. The camera industry seems to...
  6. S

    New Sniper Team, what ammo for LMT 308

    The documented average spiper engagement distance for U.S. law enforcement personnel is 50-55 yards. Why is employing extremely low drag (ELD) match grade ammunition even a consideration? Law enforcement studies have concerns of over-penetration with match grade ammunition at these distances...
  7. S

    Pin and Weld Muzzle Device removal

    IF the BATFE is tacking on pin&weld violations one has a lot more Federal G-men legal problems than any minor unintentional assembly infraction.
  8. S

    Rocksett and torque

    I inquired to Flexbar, the mfg. of Rocksett. From the horses' mouth: Of course, soaking in hot water is the method to release the ceramic adhesive.
  9. S

    Bullseye Ammo Can long Rang Camera

    I started with the original Bullseye ammo can then (when it was shown a router on the ground didn't broadcast but 100-200 yards at best) purchased their "1000 yard Edition" which came with a short tripod; same situation with range limited to ~300 yards with low resolution FosCam. Spent several...
  10. S

    Fixed Rear sight suggestion

    I have this on my HK .
  11. S

    USB Power Bank Carrier From DoTechne

    I like it alot except for the brass ? threaded inserts? for corrosion from the elements.
  12. S

    Sidearms & Scatterguns VP9 or P30?

    Some stuff from the load-out room. The Hk45 Compact Tactical Mk24 Mod-0.
  13. S

    Sidearms & Scatterguns VP9 or P30?

    I have thousands of rounds through all of these. No issues of worry for any of them. The HKp30, Vp9, Walther PPQM2 and MP9 2.0 are virtual ergonomic clones, look past the hammer to snag on something and magazine release mechanisms. I prefer the paddle release. Safariland offered a special...
  14. S

    Best hands on Gunsmithing School that also teaches machining?

    So, to McCameron's point: The brass fixture featured above is the second effort. First effort I attempted to use M-2 steel blank. Required carbide everything, drill bit$, chamfer$, tap$.....I have it 90 % completed except for threading the 8-32 holes, so far 2 solid carbide taps = $190 are now...
  15. S

    Best hands on Gunsmithing School that also teaches machining?

    For almost 10 years now I have been using the vertical Bridgeport Series 2 & LeBlonde CXA size lathe now to tinker on gunsmith related projects. Need to learn how the machines work and how you work the machines. Tubal Cain (MrPete22, Joe Pie (Piecynski), and BlondiHacks (Quinn) have fabulous on...
  16. S

    Gunsmithing Removing engraving, Stainless Colt Commander

    Mill it off. A simple hand file then a checkering file on both sides to the area; better grip for racking the slide.
  17. S

    Suppressors DIY Suppressor alignment gauges

    IF you haven't already, I found it useful to put a chamfer on the end of the tight tolerance rods and use some lubricant for insertion.
  18. S

    PVS 1431’s won’t turn on

    Ask the toddler to push the helmet back the other way.
  19. S

    Armorer's tools for AR-15

    Musing on the lathe today. Fabricated a quick-reference guide gauge for AR carbine / rifle buffer spring lengths. I have observed some AR gunsmiths apply an adhesive measuring tape to the work bench, others take a yard stick for reference. Used 3/8" 6061 aluminum round stock to fabricate a 15"...
  20. S

    Sidearms & Scatterguns Springfield Hellcat Pro...Thoughts?

    I like the Hellcat. Installed an Apex trigger and Romeo Zero optic. Use a Safariland GLS holster. Very accurate @ 20 yards with a variety of ammo. The Hellcat profile is quite similar to a number of other small frames, a few to ponder and compare it with including double stack .357 Sig calibers.