Search results

Search the forum Search Articles
  1. Z

    Gunsmithing TL3/SR3 Bolt Heads

    Yes.
  2. Z

    Bighorn Origin Build Thread

    Yes, those are the ones we've found to work the best out of the box.
  3. Z

    Bighorn Origin Build Thread

    The Origin will not work with the Wyatt's boxes. To run the 6.5 PRC, you have to run it out of a detachable box magazine without a binder plate. Thank you
  4. Z

    TL3 Vs Origin, what am i sacrificing?

    The Origin will always have a slightly stiffer bolt lift than the TL3 will. That's because the Origin has more firing pin fall AND a steeper extraction cam angle. When re-cocking the bolt, the Origin has to move a farther linear difference at a steeper angle. Bolt close can be made nearly...
  5. Z

    NEW From Zermatt Arms - RimX Actions

    We went to the swept handle on the Origin because that was what the overwhelming majority of the public had indicated they wanted. We kept it on the RimX because it's a more direct fit than a straight handle into Remington 700 inlet stocks. We understand there's a desire for a straight handle...
  6. Z

    NEW From Zermatt Arms - RimX Actions

    The bolt handle angle on the RimX is the exact same as an Origin. Thanks - Ray
  7. Z

    ORIGIN Orders

    If you believe you have a Rev1 bolt and are having actual issues with the function of your action, send me an email with a picture of the bottom of your bolt body where the cocking piece is held in relation to the cocking ramp and I'll advise what to do. If you're not unhappy or having problems...
  8. Z

    ORIGIN Orders

    Neither of them are close to a TL3 because of the firing pin fall combined with the degree of closing and extraction cams.
  9. Z

    ORIGIN Orders

    And just to be crystal clear, there is not a functionality problem with the Rev1 bolts. They work just fine, but they are much harder to time without taking out a bunch of firing pin travel. Also, the Rev2 bolts create a heavier bolt lift because the ramp angle is steeper. Thank you - Ray
  10. Z

    ORIGIN Orders

    Let it fly!
  11. Z

    ORIGIN Orders

    I can typically tell you based on serial number because there were so few of the rev1's
  12. Z

    ORIGIN Orders

    You may still have a first revision bolt. There was a revision change very early in production and we've corrected most of them. If you could send me an email ([email protected]), I'll get it sorted out with you. Thanks - Ray
  13. Z

    ORIGIN Orders

    You're going to be best off following the below advice. Measure the cock on close and let us know how much you have. We can get you the correct size cocking piece so everything matches up the best and you don't have to worry about changing the designed geometry.
  14. Z

    Zermatt Arms New "Origin" Bolt Action Receiver

    Sorry for the delay to the Forum, NEW PRODUCT ALERT - $750 Promotional Price through January 31, 2018 Zermatt Arms, Inc., manufacturers of Bighorn Arms actions, is proud to announce The ORIGIN action. Not just another “me too” action, the ORIGIN is a...
    • Thread
  15. Z

    NEW From Zermatt Arms - RimX Actions

    Not sure on the others weights, but we're just producing actions and magazines. So it's going to be tough to compare without a barrel attached. If I had to guess, I'd say about 34 oz's because there is far less material removed in the ejection port and magazine well.
  16. Z

    NEW From Zermatt Arms - RimX Actions

    2 lug, 90*
  17. Z

    NEW From Zermatt Arms - RimX Actions

    Introducing the RimX action from Zermatt Arms. www.rimxaction.com - Remington 700 Footprint - Integral Recoil Lug - Nitrided, chromoly reciever - Nitrided bolt body - DLC Coated Bolt Head - Non-protruding, fixed...
    • Thread
  18. Z

    NEW From Zermatt Arms - RimX Actions

    That is correct. Action and (1) aluminum magazine. Barrels will be available through your gunsmith or dealer of choice just like a center fire custom build.
  19. Z

    NEW From Zermatt Arms - RimX Actions

    Left hand actions WILL be available.
  20. Z

    NEW From Zermatt Arms - RimX Actions

    Introducing the RimX action from Zermatt Arms. www.rimxaction.com - Remington 700 Footprint - Integral Recoil Lug - Nitrided, chromoly reciever - Nitrided bolt body - DLC Coated Bolt Head - Non-protruding, fixed extractor - 6 o'clock firing pin - Tool-less bolt disassembly - Interchangeable...
    • Zermatt Arms
    • Thread
    • 17 wsm 17hmr 22lr bighorn bolt bolt action bolt gun rim fire rimfire zermatt
    • Replies: 3,767
    • Forum: All Things Rimfire
Top Bottom
Back
Home
Forums
Merch
Alerts