Search results

Search the forum Search Articles
  1. J

    WC 844/846 rifle powder review's/testing results

    24.3 of their WC-846 with CCI mil primers gave 2880fps out of an 18 inch barrel. (Edited to add: using mil- surp 62 gn steel core) American does auctions on Gunbroker, and you can get it a bit cheaper that way, but the bid lots are for 16 lbs, and they do not combine shipping. All that they...
  2. J

    WTB/WTT Spuhr SP-4011

    Looking for a used SP-4011 before I buy new. Let me know. I do have a very lightly used SP-4002 if a trade is desired. Nevermind. Purchased one from a vendor.
  3. J

    Dillon 550 Parts ID needed

    Part on the right does not look like a Dillon part to me, but might be to help hold a casefeeder? Bracket on the left bolts to the right side of a strongmount ( as you are facing the machine to pull the lever). Holds your bin of brass on the front, and the bin of finished ammo on the right...
  4. J

    Couple questions

    1.Most: Chargemaster/electronic powder dispenser. Hugely better repeatability than a beam scale or even an electronic scale without a cover on it. 2. Least: Case neck turning, primer pocket uniforming on decent quality brass.
  5. J

    WTB TRG-S (M995), TRG 42 300 WM barrel

    Someone has been trying to sell one on eBay for $200 for months now, if that fit your definition. Search TRG barrel....
  6. J

    Dillon RT1200 Trimmer with Dillon 308 Trim die REDUCED

    I’ll take it. PM me an email for PayPal.
  7. J

    jcam and iShoot17 are GTG

    Bought reloading equipment parts. Smooth transactions with both of them.
  8. J

    150gr .308 FMJBT bullets (500 ct) plus .30-06 Lee Crimp Die FCD - $80 PRICE LOWERED 10/13

    If not already sold, I would take the package for $80.
  9. J

    Lookin for AR-10 suggestions

    As stated above, Aero M5 and a Faxon barrel is a good start for a build. 1 moa will be hard, 1.5 should be do-able. Adjustable gas block (I like the Syrac click adjustable) and a H3 buffer for the suppressed aspect. I cannot see where the saving of an once for Ti is worth the cost, but then I...
  10. J

    Spuhr mounts for sale SP-3001, Sako TRG mounts 7mil/24MOA $275 each. Both SOLD

    If one of the Sako mounts is 34mm rings and their low/ 35 mm hight, I would take it.
  11. J

    Accessories (Sold) Surefire Cloud Defensive LCS ST07

    I’ll take one of the Valkyrie lights. Would also take the keymod light mount if it is a ring mount, not the Scout mount? Pix do not display on my end.
  12. J

    Sold Redding 308 standard seater die

    I’ll take it. PM me an email for PayPal.
  13. J

    Gunsmithing Sako TRG 42 & 22 bolt handle attachment method

    The bolt handle is loose, but you cannot tighten it or remove it? So is it really loose and moving, or is there just a gap than is unsightly to you? It should be threaded on, with some loctite on the threads. If it is stuck in the current position, I would wrap the rest of the bolt handle...
  14. J

    .308 Subsonic Reloading Myths?

    http://www.hodgdonreloading.com/data/rifle Hodgdon has load data for .308 (and .223 subsonic) using small charges of Titegroup pistol powder. I use 180 grain round nosed/flat based hunting type bullets for more stability (shorter bullet =more stability) as recommended by Gemtech. No primer...
  15. J

    300 win mag for $1500?

    Tikka T3 Lite? And $ leftover if you want to upgrade the stock. https://www.gunbroker.com/item/817444382
  16. J

    Good powder for relaoding 308?

    AR-Comp. May give you higher velocities.
  17. J

    Berger .224 77 grain OTM with AR comp??

    For AR-Comp with Nosler 77gn Custom Competition (0.98 in long), 1x fired LC brass, Tula/Muron small rifle magnum primers fired out of a 16" 1:7 twist barrel: 23.8 gives 2671fps and sometimes just a trace of ejector swipe at around 75F temp. Mid-length gas system and an adjustable gas block...
  18. J

    A question for the experienced reloaders

    Not worth the $ or the time.
  19. J

    Sold

    Paypal sent. Ship when convenient for you, no rush: S. Terrenzio 3417 28th ave W. Seattle, WA 98199-2731
  20. J

    Sold

    I’ll take it.
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts