Search results

Search the forum Search Articles
  1. J

    SOLD Athlon Argos BTR gen-II MRAD $290

    I'll take it.
  2. J

    FSP-759 powder in .308 Win, a brief review.

    Summary: an available mil-surp stick powder good for medium/heavier .308 loadings. Possible 6.5CM use, but may have issues filling the case enough to get desired velocity. Temp sensitive. (Not even going to attempt an in-depth review at Molon’s level of detail.) FSP-759 is a Russian...
  3. J

    Best dry bullet seating product?

    Don't know if it is the best, but "motor mica" works from me on necks that have been cleaned by tumbling in stainless media. Dipping the case neck into coated balls or other coated media, same as your current method. Brownells has a refill for Lyman, they used to also have their Sinclair brand...
  4. J

    Need a little help... Glock 23

    Bullets may be slightly undersize. I had this issue with some bullets that I bought of Gunbroker to reload. Shot ok from an aftermarket barrel with conventional rifling, but not from the stock barrel. Then later figured out the were slightly undersize.
  5. J

    Night Vision Colors and coatings for camo

    Not that you can get them to ship you the paint due to the hazmat hassle, but: https://www.varusteleka.com/en/product/nfm-ec-paint-400-ml/35070
  6. J

    Gunsmithing What Anti-Seize Lubricant???

    I also use the Loctite copper based as posted above. I reality, their nickel based product is better if you are worried about possible corrosion between dis-similar metals, but harder to find and more expensive.
  7. J

    M1A guys, help me out.

    "Left" hole is 12-32 UNEF, so unlikely to fine a set screw in hardware store to plug it. You could have a light coat of oil in the hole, then put some RTV silicone or something similar to fill it to keep any dirt out. Would create an easy plug to remove later on.
  8. J

    Reloader 23, 190 SMK's and .300WM

    Great info. Looking back at my old notes (after I had posted), I had actually done the magnetospeed on a second range trip with new batteries in it after not trusting the first data set. So looks like your and my number were real and faster than Alliant predicts. And I can't think the extra...
  9. J

    Reloader 23, 190 SMK's and .300WM

    I jsut started with the Alliant data and worked up. Sako TRG with 27" 1:11.25 twist. Winchester brass, 190 Nosler CC (190SMK clone), bullet seated long, but don't have the OAL handy. 75.3gn of RL-23 gives me good accuracy. Magnetospeed gave me average of 3160fps and SD of 12, but I find...
  10. J

    Spuhr or other options?

    I like Spuhr. I would conside one of their newer/cheaper "hunting?" mounts if you don't need to add a bunch of rails or a red dot. For .308 it should not matter, but I did have issue with an ADM mount letting the scope slip under recoil when shooting a mag cartridge.
  11. J

    YouTube Channels

    9 Hole Reviews. But I believe the furthest he normally shoots is 900yds. Perhaps limited by the local range.
  12. J

    Blast from the past

    I tried a few pistol primes in .30 carbine. Pireced about half of them. So depending on brand, the pistol primer are thinner or will take less psi than the rifle primers. Wolf brand in my case,
  13. J

    What's your preferred method and type of case lube on a progressive press?

    As above suggested, Dillon lube sprayed on the brass that is double bagged in zip-loc bags. Then shaken, not stirred....
  14. J

    Longer bullet same weight swap? Safe or not?

    Probably safe. But it should have higher pressures as you stated. However, I think most of the pressure increase is due to the fact that the longer bullet will likely have more surface bearing agains the barrel, so that will be the cause of the pressure increase. Try a few and see if the...
  15. J

    Ramshot Big Game

    Yes to the low risk part of the question. The few grain weight difference and the slightly different bullet length will not be noticed.
  16. J

    Sako TRG 22 opinions

    For shooting prone or off a bipod, I would go with the longer barrel. Steiner Ti 5-25 scope can be found used for around $1300. One just sold here yesterday. 20 moa pic rail or a Spuhr TRG mount with some moa built in directly to the receiver if you really are never going to use the scope on...
  17. J

    Hillbilly annealing

    Agree with Rocketmandb. I use a similar method for .308 cases. You can see the color change at the approx time interval.
  18. J

    Best long range 30-06 bullet

    Take a look or do a search on some old threads by MontanaMarine. Seems like 208 Amax and RL-22 was a good combination. https://www.snipershide.com/shooting/threads/incredible-30-06-loads-real-or-bs.14557/#post-531832
  19. J

    4895 in a 223 / 5.56?

    I load US mil-surp 4895 on a Dillon 550. The kernal size really doesn't meter the best for .223, but is workable if you can live with some velocity Std Dev. I use 25.0gn behind a Nosler 77gn, giving around 2580fps from a 16" barrel. For .308 I use 42.2 behind a 150 FMJ for a cheap bolt gun...
  20. J

    SOLD Redding 6.5 CM FL sizing die

    I'll take it. PM me an email for paypal.
Top Bottom
Back
Home
Forums
Merch
Alerts