Search results

Search the forum Search Articles
  1. R

    .22 br

    I have no experience with this combination. I doubt there are many people using 6.25 twist. I don't think it necessarily blows up but I've found that over RPMs to cause flyers and unstability. I had no luck back in the day trying to shoot 90 smk's over 2900 fps and my conversation with Sierra...
  2. R

    .22 br

    That a lot of RPMs. I would not shoot 90 smk in a 1-6.25 twist at 2900+ fps.
  3. R

    .22 br

    I assume since the suggested twist is 1-6.5 I don’t trust the 90s but you swear by it 🤷🏼. Good to know
  4. R

    .22 br

    I don't think the 90 smk would survives the aggressive twist needed to stabilize the 95gr (the op seems to shoot the 95 exclusively and thus have a 1-6.5 twist or similar) The smk was never intended for 2900 fps + in aggressive twist
  5. R

    6mm Dasher

    Does anyone have any data on the 95gr Seneca from PVA. H4350 and Varget?
  6. R

    Is this a cratered primer?

    I have 4 and they all do
  7. R

    Is this a cratered primer?

    It’s a Bighorn, they all do that. Not an issue
  8. R

    Automation for sizing operations

    So my 750 is running. I’m really happy and I’m waiting for my autodrive. With that being said.. Anyone is running a Mr bullet feeder with 6mm bullets and 0.284s ? It will be fine for my 6.5 but I wonder for my 6s and 7s.. I spoke with DAA and they said they had report from users( both positive...
  9. R

    Automation for sizing operations

    I don’t need. I run Lapua or IVI brass. I have a good contact for the IVI ( not the Israel brass), that gave me brand new brass. So I don’t need to bother with swagging.
  10. R

    Automation for sizing operations

    I placed the order yesterday for a 750, the case feeder and conversion kits. I also bought Armanov accessories. I’m just waiting a little bit for the autodrive.
  11. R

    6mm Dasher

    I’m sure I could find a meme about that lol. The whole one ragged hole thing… No load development was made yet since it only shot 105 rounds. I just took an arbitrary charge and decided to test the seating and it still shit a 0.4" group at one depth. Not too worried. I bought the 112s for...
  12. R

    6mm Dasher

    It’s funny, 0.060 was the only other spot where it shot ok. Like just under 1/2” I didn’t consider it because 0.050 and 0.070 where 3/4 ish. Might need to check from 0.053 to 0.068"
  13. R

    112 Match Burner 6 Dasher

    I just runned a seating depth test at 34gr Nothing good expect from 0.040" jump. Everything else from 0.030 to 0.100" shot around 3/4 Barrel is still new (105 shot fired ) 34gr was giving me 2784 fps
  14. R

    6mm Dasher

    Well the 112s test was a little bit inconclusive. The barrel is still quite new ( 105 shots fired). I was getting 2784 fps with 34gr of H4350. I took the opportunity to test the seating from 0.030" to 0.100". Everything was 3/4 expect for 0.040" that shot 0.4". I’ll theist between 0.033" and...
  15. R

    Automation for sizing operations

    I took the time to read your various posts. I have placed my order for the XL750 and just need to buy the toolheads. Would you recommend the Armatov more than the Whidden?
  16. R

    Automation for sizing operations

    I’ve found all the conv kit I’d need. But for 6BR and 6 Dasher I’m not sure. I know it’s the same locator pins and shellplate but what about the case feeder adapter and arms bushing..
  17. R

    Automation for sizing operations

    What caliber are you sizing on it? Any issues or mods needed?
  18. R

    Automation for sizing operations

    I have read several posts about the Mark 7 and other press on auto drive but I don’t need all the bell and whistles. I would like your opinion on the best option for my needs: I would like a press on drive that would only handle the resizing operation. 223 to 308 class brass I don't need to...
  19. R

    6mm Dasher

    I’m doing the same but with Barnes 112s.
  20. R

    6mm Dasher

    204 and RS62 should be pretty similar to H4350. My reference speed is 2860-2875 with the 109s.
Top Bottom
Back
Home
Forums
Merch
Alerts