Search results

All you need to pay is shipping. Here's the catch - the barrel has been installed on 2 actions, a Lone Peak Razor and a Rem700. Both times, the barrel has shot loose after 8 (Razor) and 44(700) shots. I believe the threads are cut too loose, but the uncaring fellas at McGowan Precision Barrels...

I have 8 pounders of each. Originally, I was told that I could use H870 data as WC870 data. I loaded some rounds, and chronoed them. They fell WAY short. So I planned a test. The test- I loaded 5 rounds of 7mm REM MAG with 79.0g of each powder, a 168g Nosler CC, Tula LRM primer, all in once...

Doing some HVAC work, I picked up both an Infrared thermometer and a Multi-Meter thermocouple. I can use either to get an exact temperature reading on my barrel instantly. So, here's the question- How hot should I shoot my barrels? I would take readings at the throat area, where Temp should be...

How do the experts figure out what bullet works best in their rifles? There are so many variables that I feel like I could shoot half the barrels accurate life while searching for the bullet it likes best. Does anyone have a "system"? I'm thinking that if I choose a desired exit velocity, a...

So here is the deal. Twice now, a remage barrel nut barrel in 284 has come loose after shooting. The first time, I hand tightened (no torque wrench) the nut and "tapped it with a hammer". After 10 or so rounds, it twisted loose. 2nd time round, I torqued it down to 100 FT Lbs with a torque...

I have 50 boxes of 50, all sealed in original packaging. $50 per box. $450 for 10. As always, I am open to trade for high grade optics.

So I have a whole lot of pull down, primed Federal brass from American Reloading. I was wondering if anyone has experience with it, and what their thoughts were.