Search results

Coming to yall for advise on a quick repair for Drain Spout cap on the side of an RCBS chargemaster. the other night after I loaded up some rounds, I went to dump out the powder and when I turned the drain spout cap to open it, the damn thing split in half. The only thing I can think of is a...

I have some older Aluminum barrel blocks and these do not grip anything. What do yall use or would you use to help make these blocks grip the barrel better? I was thinking of spraying them with Plastidip but didn't know if that would hold up to the pressure once it is in the vice. I have used...

This is just a situation I was told about and didn't know the answer too. This guy received all of the guns through a will from someone that died in his family. One of them was a real M16 or so he believes. I am assuming it has the 3 round burst (i dont have much knowledge of these so just...

This post could go into a couple different sections, just figured hear would be best since i am more worried about the brass. I was doing some load development this weekend for a new AR in 6.5 Grendel and I came across some interesting findings that I have some questions on. I was shooting...

Dumb question but can you take a Remington 700 in 270 and open up the bolt face to accept 300 win mag? would it be better to just buy a 300 win mag bolt? just curious as I am going to start working on a this build and didn't know if there was still enough meat there for it to be safe.

I am sure this is going to piss off all you Dillon lovers out there. haha. cant wait for the "just buy Dillon" comments coming. But seriously, Has anybody used one of these? looks like it would work pretty good. it seems more compact if you wanted to mount it to a bench and has an auto eject...

I am starting to get into the 6.5 Grendel and have seen that the hornady 123gr sst is the go to bullet for this gun. the problem is every single place that I can find is out of stock. did they discontinue this bullet or just running low on supplies? Correction, I did find one place that had...

I have an AR pistol in 223 and looking to build an 18" 6.5 Grendel that I can swap between. The reasoning behind not just building a designated Grendel is my two gun case is only 32" long and I already have the lower setup perfectly. Does anyone swap out their stocks between a pistol brace and...

I am torn between 2 scopes and its come down to the reticles. Does anyone have any experience with the strike eagle BDC on an 11.5" 223 SBR? Do the yardages match up to hits on targets out to 300 yards? I know the shorter barrel is going to give me slower velocities than what the BDC was built...

So instead of buying a tube of aero shell, I have access to the below 2 anti seize compounds. wondering which one I should use or just buy the aero shell? Nickel Anti-Seize: protects to 2400 degrees and meets Mil-PRF-907E Copper Rich (Copper Coat): protects up to 1800 degrees and exceeds...

Figured the reloading page was the best spot since I will be reloading this round. If I am using one of the 210-230 gr bullets, is it worth getting the CIP magwell for 3.850" mags or will the standard 3.715" magwells for 300 WM suffice? since I am still in the early stages of the build, I want...

I am going to try my hand at installing a Grovtec Flush Cup into a B&C stock this afternoon. I cannot find a tap anywhere in san Antonio that has a 9/16" tap. My question is, can I use the threads on the cup itself to tap into the stock? I know it is not professional but will it work? I will...

I tried looking for something on this but haven't found anything. so this either means, not worth it or not recommended. Do any of yall polish the bolt raceways in the action? I have a savage model 10 and just curious if it will smooth it out a little bit. Nothing severe, works great. Just...

For the people that use temperature sensitive powders, do you adjust your charges to the temp of the day you are shooting? I have a load that is salty at the 70-90 degree temperature but once it goes above 100 then it opens up. The higher the temp, the more pressure which equals more speed which...

I was looking at the below barrel to replace my stock bushmaster barrel but haven't really heard much about these guys. they are here locally to me so just curious if anyone has used there barrels before and if they are worth the money...

Just curious if yall think cold bores count on groups? Either way, I am very pleased with this grouping. Here is the measurement with my cold bore shot. 5 shots total. here it is without the cold bore shot. 4 shots total. 260 remington savage model 10 action 26" shillen barrel 143 gr...

I have an older micrometer seating die from my 308 and was wondering if it would work for my 260 Remington since it is the same case but different bullet diameter? I have a seating die specific for that caliber but curious if it would work. I am running 2 different bullets and it would be nice...

Has anybody used these mags or any feedback on them? they seem to be out of stock everywhere so did they stop making them or just everyone is buying them?

Anybody using any of these style holsters? I am going to retire the G19 and it is a little bulky to hide anymore since ive dropped weight. gunna start carrying a G43 but was thinking having a spare mag next to the gun would be nice since the round count isn't that high in the 43. Here are some...

Ive been testing some alternate powders for my 260 to try and get a touch more velocity and finding an accurate load. Here are my results using 2000MR and RL-17. PLEASE NOTE: MY BARREL ALLOWS ME TO RUN HOTTER LOADS WITHOUT ANY PRESSURE SO WORK YOUR WAY UP TO THIS. MOST OF THESE ARE OVER BOOK...