Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
FYI on batteries. I tried the Orbtronic 800 mAh rechargeable battery which is 35.65 mm in length and it does sort of fit, but only has just under one thread of cap engagement. The Panasonic battery that came in the box is a bit better, but still only has a little more than one thread of...
The top video (F-Class John) on the product page should answer most if not all your questions. I don't want to sidetrack this any further out of respect for the OP's question. I'm not even sure he is interested in this product. There is another thread here that has most if not all the info on...
I don't think it matters. Mine usually throws 1 kernel under, but occasionally goes 1 over. The little bit it trickles when the powder is dropped is insignificant. I can set it to trickle slower near the end of the charge and it will almost always be .02 gr under, but I wanted to keep the speed.
Thing is the IP trickler is a proven performer. The IP powder dropper doesn't have to be super accurate just in the ballpark. What I'm really looking forward to is the trickler controller that will come with the IP dropper. From what is shown in the video previews it is accurate down to a single...
OR if you can afford to wait 1 to ??? months, the Ingenuity Powder System is on preorder now. http://ingenuityprecision.com/product/ingenuity-powder-system/
Thank you for figuring this out! I suspected it was something along those lines. It appears there is room to move the magazine back in relation to the chassis and still have it feed correctly. If I recall correctly when I used the Hornady factory 300 PRC 225 gr match ammo to break in the barrel...
I'm using a CDG LA chambered for 300 PRC in an MDT ACC chassis and if I load the cartridge to mag length it won't feed. The nose of the bullet hits the bottom of the action so it can't rise up into the action to feed. An earlier poster in this thread posted pictures clearly showing the issue...
I had similar issues with 300 PRC with CCI 200s and ADG brass. I was originally seating the primers .010" below flush and had some failures to fire (15%) even with multiple attempts. I believe I was crushing the primers too much and they just wouldn't ignite. After disassembling the dud rounds I...
If the IP dropper works as well as the IP trickler then it will be a great product. I use the IP trickler with the V3 and it works very well. There are still a small percentage of overthrows, but it is fast and accurate overall. With the new IP controller electronics the IP dropper/trickler...