Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Ordered a CS2 through APRS here in Australia in July 2021 with a 30% deposit. I was told roughly a 7-8 month wait, I'm still waiting.... word from Manners (through APRS) is likely another 6 months which I don't believe at all
Here in Australia it probably did... for reference Pmags sell for US$180ea here and I saw a D60 mag sell for over $US700. Anyway, i was bored and have a fridge full of Cerakote going off.
I picked up this MR762-A1 earlier this year. It's been cut down to 14.5". I use it for Ariel pig shooting hence the Aimpoint CompM5s. My only complaint is it's heavy (compared to a similar sized 308 gasser) and the trigger sucks. I initially zeroed it with some old M80 ball at 50m and I was...
I used a Lothar Walther parallel blank, profiled the same as the DD. Brought it in on an Import permit, I have plenty of gass guns. I've decided to drop the barrel back to 18". Whilst it shot fine at 20" the brass was pretty beat up. Since the barrel is out, here's the front of the upper...
Yes, rifle length gas. I couldn't get a longer length gas tube here in Aus. Roughly 100ish rounds of Hornady 140AG through it so far, no cycling issues and shooting MOA.
Sorry, I don't have a pic of the front of the upper. I took that pic of it broken down a couple of months ago when I fitted that 20" 6.5CM barrel. Accuracy from the DD 16" .308 barrel was 1/2-3/4MOA with various factory ammo.
Firing Pin diameter Zero slop between upper/lower, and take down pins are tight. Feed Ramp Barrel is sandwiched between the upper and handguard, held in by the 4 handguard bolts.