Search results

UPDATE :D Rifle shot fantastic, at least fantastic with me barely putting in effort. Range was kind of packed and half the time people / ROs were asking me about the rifle as it seems PRS guns arent to common at that range? I brought a half used box of 147g hornady match, and a box of hornady...

Haha I have limited files so Im ok with it.( I was mainly using a large bastard file and some chinesium dremmel attachments ) I left it as is just in case I end up needing more done after my next range trip. Im going to do a smoothing pass with some small files I ordered after I verify all is...

I removed 6 bullets and powder. Ran all of em through the action with zero issues. Mine was closing about 90% ish. After filing, and dremel work there's good space between the action and the chassis on the handle side. Next Saturday I'm taking her to the range again but this seems very...

It seems to close the whole WHOLE way now with some room to spare. Let's hope this it next range trip. Gonna allumahide this bit and wait for cure now!

Action all the way down, bolt isnt Bolt all the way down, action screws removed. Time to start filing the chassis . Thank you guys!!

Yeah mine is definitely off. This is what I get for repurposing an Bergara chassis. I'm going to hit the bolt knob section on the chassis with a file till I can close the whole way. It was maybe 1-2 degrees off. Though I have no way to measure the angle

HOLY CRAP I think this is it!

Here is what I was able to measure with calipers. Here is what I have been able to measure (firing pin protrusion) I also measured how far the pin goes through the back of the firing pin shrowd. Out of the action. In the action. Am I drunk or should the measurement of the pin from the back...

I also made 2 videos to see what I was attempting. and once on the action

Hello, first I would like to say that I read the couple existing threads on light primer strikes and followed the advice that was on those threads. I wanted to post my issue as well as magdump some photos I took with this build. I purchased a Zermatt Origin and a Proof 6.5 Creedmoor barrel...

My new origin has this same issue. 15/20 rounds had light primer strikes it seems. The ones it did fire didn't seem to have any visible issues. I also checked the headspace using go/ no go and things are correct. Not sure if maybe somethings up with the bolt

I took my factory stock and epoxy filled my front end, and filled the buttstock with silicone and some weights to balance the rifle. Also cut out and sanded the front handguard to actually free float the barrel. So far it's shooting fine, it's sub moa at 100 and for smaller groups I have my...

So far they made the actions for the 700, Tikka T3X and Savage, I really hope they make this for the TC compass short action...