• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. nvrpc1

    .308 Winchester

    175 SMK 43.4 IMR-4064 FGMM Brass Form Fired 2.800 2717 fps 22" bbl
  2. nvrpc1

    Fire Forming Remington .308 Winchester

    Well I have an idea that maybe someone has done but I have not seen it done and maybe it can not be done. As you well know hornady makes what they call a hydro forming die. They take 308 cases and make 243 case our of them. How about this. Has any taken a form fired piece of 308 Winchester brass...
  3. nvrpc1

    308 Muzzle Velocity with 175gr

    What sofware tool did you use to make these two charts. I need to make one for each 308 rilfes I have for both FGMM and my own home loads. Please advise ASAP. Thanks
  4. nvrpc1

    7 Rem Mag - 7 WSM - 7-08

    Well, I did not find what I wanted so maybe someday someone will see this. I just went to the Hornady website and they list 60gr of IMR 4350 behind a 162 gr bullet but it was not the ELD-M I am using in Hornady brass. Well, I had Federal and did rather well but now all I can get is once fired...
  5. nvrpc1

    Having trouble using the site?

    It looks as if you are not a paying member you can n ot access any informaton or even post a question and if you do no one sees it. True or false
  6. nvrpc1

    Reloading - cost of entry

    New and Reloading Almost a Wash With tax, hazmat and shipping it will cost me $1,134.53 to reload 1000 rounds of 308 175 HPBTMK. I can buy 1000 FGMM from a vendor for $1337.00. I don't find this to be much of a savings since factory FGMM in 168 and 175 shoot just fine in my 700R5. I will say I...
  7. nvrpc1

    Donor Brass: Federal vs. Hornady

    For the 178 ELDX I have loaded 41.7 gr of IMR 4064 and got good groups. I have now loaded 41.7 gr of IMR 4064 in Hornady brass. Should I expect to see the same results. I keep hearing how case capacity makes a difference. I also noticed Hornady does not load the 178 ELDX but gave that...
  8. nvrpc1

    .308 Federal GMM 168 grain Load

    If it's not 4064 thn what is it. It measure out to be 40gr behind a 168 and 40.2 gr behind a 175. We'd really like to know instead of wasting time and ammo and not getting an exact replication of the factory load. This stuff now cost $1,227 for 1000 of 168 and $1,337 for 1000 of 175. It's nut...
  9. nvrpc1

    Federal gold match 168 gr smk reloads

    I just disassembled one factory round of 168 FGMM, federal brass and found the powder to weight 40 grains. I looked at the powder in the round compared to IMR-4064 side by side and found the diameter was the same but the length was shorter. Does anyone know if it still 4064 or is it some other...
  10. nvrpc1

    Looking for known accurate 223 loads

    You gotta love know it alls. (n)
  11. nvrpc1

    Looking for known accurate 223 loads

    One of these days we will have to try 1000 yards with the 5.56. For now we are at 600 yards and trying to group well. Next we'll go to 800 and then move on to where you are. Were you at least 1 MOA at 1000 or did you do better?
  12. nvrpc1

    Looking for known accurate 223 loads

    For now I am loading 24.0 gr of TAC and it seems to be doing good but we will have to try the 23.2 - 23.7 gr of AA 2230
  13. nvrpc1

    Rifle Scopes Leupold CCH Reticle Sub tensions?

    I just bought a NIB VX-3i 8-25X50 FFP MIL Side Focus with the CCH reticle. I can not find any video's on how to use this properly. It appears you use turret dial up off the data from a Kestrel 5700 and then is correcting is needed your spotter tell you your holdover and windage and then you...
  14. nvrpc1

    Looking for known accurate 223 loads

    I could not get Varget but I did get A2230. From what I see here 77 SMK w/ AA2230 22.0 should be fine. Would you happen to have a photo of a group shot using this load. I am guess this text above 77 SMK 2.260 mean 22.6 grains. Please advise
  15. nvrpc1

    Looking for known accurate 223 loads

    Yes that is what I have been told and understand why but I do have a question, what is a nato load? Are we talking FPS for a particular bullet weight such as 69 and 75. Please provide some load or where you got that loading data from
  16. nvrpc1

    Looking for known accurate 223 loads

    First test of rifle. This is factory PMC 55 GR FMJ-BT and it seems to be doing just fine and I'm bet with 55gr Blitz King using AA 2230 and federal small riles match primers I will do just as good or better out of an off the shelf RRA AR15 no mods done and only a reddot 1-6 Vortex. I think I...
  17. nvrpc1

    Looking for known accurate 223 loads

    Well, I lost my old post I wanted to update with this photo but the best I could do with off the shelf PMC 55gr FMJ-BT 2,900 FPS was as shown with a 1-6 Vortex red dot @ 100 yards. There was just nothing to aim at except for a blown out 1" dia center which only had about 1.4 of the white line...
  18. nvrpc1

    Looking for known accurate 223 loads

    Well, after using red dot vortex 1 - 6 on the range yesterday at 100 yards trying to group I discovered the best I could do was .800 MOA and that to me is not all that good. This comes from shooting the center out of the paper target with a 308 prior to trying to sight the AR 15 in at 100 yards...
  19. nvrpc1

    Looking for known accurate 223 loads

    Awh, I did not notice that. It's says 2.250 for the 55 gr Blitz King. Thanks
  20. nvrpc1

    Looking for known accurate 223 loads

    Well it's now onto the next question. I have this chamber in my RRA -https://www.shootingillustrated.com/content/223-wylde-the-ideal-ar-15-chamber/ and have fired ~ 500 rounds. I saved the brass and now as you can see want to reload. I need the ammo to fit into the mag so I am assuming I should...
Top Bottom
Back
Home
Forums
Merch
Alerts