Search results

I was wondering if anyone knew offhand what the bullet length is for the 300 grn Scenar. I'm trying to load this into my Kestrel. Thank you.

Can anyone tell me an approximate value of how much a .1 of a grain will increase the velocity for H4350. I'm shooting 139 Scenars from a 24" barrel. I need to bump my velocity up about 40 fps. I've been unable to find any information on this. Thank you.

I am wondering if the Kestrel with AB can calculate changes in the angle or slope of your shot. Any help would be appreciated.

I have stripped out the area where the allen wrench goes into the allen screw head on my McRee stock and was wondering if anybody had a quick fix for this. I tried a Torx bit but that didn't work. Should I sacrifice an allen wrench and use JB Weld? It is the front action screw on the stock...

I recently had a barrel set back and had poor results on the range today. I had a great load for it and tried the same load today. The groups were typically three shots barely touching and then two off to the right about .5 MOA. This is the first time I've set a barrel back. When you set a...

I usually shoot 139 Lapuas but there was a pretty good wait so I ordered some 140 amax's. Didn't see much on the search button. Anybody here use them? Are they picky like the Berger's? Any info would be appreciated.

Anybody have a name and # of who to contact there for a new barrel? Thank you.

Does anyone have a source for 260 Rem. brass? Looks like there has been a run on this stuff.

Anyone use one of these. Would you recommend one?

Does any vendor here have the AI Spigot for the V8.1 in stock yet? Thank you.

Finally stepped up to an Accuracy International. Ordered a AI AE MkII from Jonathan at SRT on Monday. It arrived last night and I love it. I'm tired of sending my guns off to get barrels replaced. Looking forward to doing it myself. Hopefully I'll break it in this weekend if all goes well...

Guys I'm interested in designing a pistol grip that will give me a more consistant 90 degree placement on the trigger. I have a McRee stock so changing the grip out won't be a problem. Should I use wood, epoxy, or some other compound? Any help would be appreciated.

I'm interested in ranging using my scope. I have a NF 3.5 X 15 with a NPR1 reticle. I have a good range and have verified my KD targets. My targets are 12" round plates and I'm using the formula: size of target x 95.5 divided by MOA. However when I try to use my scope, my distances are WAY...

I'm interested in purchasing a Kestral 4500. I looked on its specifications and the DA range seems limited. I think it said from -45 was the bottom range. Can't remember the upper range. The DA I was shooting Sat. was -1605. Is the DA range for the 4500 larger. Thank you.

I was shooting Sat. and noticed a POI change on my targets. My first shots were good from 600 to 1000 but as I kept shooting I was having to dial more MOA to hit my targets. I felt the barrel and it was pretty hot. I don't very shoot fast. Is this a common effect, hot barrel lower impact...

After reading all of the posts on the stainless steel media thread, I wondered how important it would be to have the inside of the cases cleaned as well. I've been tumbling with a vibrating tumbler and am on the 5th firing on my brass. The insides are not clean and my question is how much does...

Anyone use the Redding competition seater die or the Foster Micrometer seater die? Are these worth the money? Trying to get the most consistant rounds I can. Thank you

Last Wed. I started loading for a new rifle I got in 260. I loaded 42 grs of 4350 pushing a 139 Lapua seated at 2.80 OAL. It was averaging 2,830 fps. The temps were around low 70's. yesterday I shot those same loads and was averaging about 3,011 fps. Temps were aroun 68 with 60% humidity. I'm...

Last Wed. I started loading for a new rifle I got in 260. I loaded 42 grs of 4350 pushing a 139 Lapua seated at 2.80 OAL. It was averaging 2,830 fps. The temps were around low 70's. yesterday I shot those same loads and was averaging about 3,011 fps. Temps were aroun 68 with 60% humidity...

I'm interested in puting an AICS stock on a Rem 700 short action. However the barrel on this rifle is a #8 straight taper. Is the barrel channel on the AICS stock wide enough for this barrel? Does the stock come with internal lug screws or do you use the same screws that are with the rifle...