Search results

The muscle brake has its first port 90 degrees to help block the blast of the additional rearward angled baffles. My opinion only, but it offers a perfect mix of recoil reduction and minimal blast back for the shooter. Sent from my Nexus 5 using Tapatalk

I reload for my Glocks and haven't had any problems in the years I've been doing it. I've used single stage with rcbs dies and the last 4000 rounds have been on a Dillon 550b with Dillon dies. I use plated bullets and have never had any issues with case sizing or feeding. Sent from my Nexus 5...

I had a bolt done a couple months ago and it looks great. Hopefully soon I will be ordering a full build. Sent from my Nexus 5 using Tapatalk

I use 2-3tbs. Dawn and a 1/4tsp lemishine Sent from my Nexus 5 using Tapatalk

Just for comparison, I'm shooting a 26" factory rem. Rem brass, br2, 48.0g RL17, 3.030 coal .020 off lands, 2640fps. moa out to 850+ Love this 208AMAX! 1000yards= 31.4 moa elevation, 1483fps, 1021ft/lb energy. Not bad for a wimpy old .308 Sent from my Nexus 5 using Tapatalk

My opinion, if you only shoot factory ammo, get the 20. If you reload, go as long as you are comfortable with. My 308 at 26" barrel shoots the 208gr amax at 2640 with reloader 17 and does great out past 1000... Fwiw. Sent from my Nexus 5 using Tapatalk

Re: Which Remington 700? I'm nowhere near a pro but, with your budget I would recommend what I did. Get a 700 sps varmint and a vortex viper 6.5-20x50. After base and rings you should be right around $1000. Then as you go you can upgrade. Stock, trigger, reloading equipment, etc. It’s...

Re: 308 Win, 208 AMax, RL17 I finally got my 208s and shot a few today. gun is a stock remmy700 26"BBL remington brass 2x fired neck sized only BR2 primers RL17 208 AMAX COAL 3.030 .020 off lands CED crony 1x each looking for speed and pressure 46gr-2539 47gr-2565 48gr-2637 49gr-2670...

Re: Remington SPS 308 upgrades with my sps Varmint, I first floated the barrel, but that made the stock even more flimsy, so I glass filled the fore end. eventually I put a bell and carlson on it and glass bed, skim bed to the aluminum block. Next I put in a timney trigger. The two biggest...

Re: Aftermarket trigger just got a timney and it was not very $ and a very good trigger set to just under 2#

Re: Recipe for 155 Sierra Palma Bullet. i can't get to the lands without the bullet almost falling out of the case, didn't measure because it wouldn't have enough bearing surface with the neck. I did have one load that shot in the high .2s but it wouldn't repeat, so i think it was luck...

Re: Recipe for 155 Sierra Palma Bullet. I give up, my SPS V doesn't like the 2156. Ive tried everything from 44 to 48.5 varget, seating from 2.800 through 2.840 and br2s and WLRs. all charge weights .3 at a time and all seating changes .010 at a time. I think it's time to try 168 AMAX...

Re: primer craters, not always a pressure indicato MY factory SPS V has a chamfered firing pin hole and also makes craters on even light loads. After a little research online, it looks like Remington is doing this on purpose like the others have said. They say that it improves the strength...

Re: 155 sierra palma I'm currently working on a load for the 2156 out of my 700 sps varmint. best I've been able to do so far was 3 round group .287" at 100yds. 26" 1/12twist rem virgin brass 45.5gr varget 2.820 COL CCI-BR2 I'm very happy with that group for a stock remmy, but I still need...

Re: Stuck Redding die lock ring all my redding dies use lead under the set screw. back out the set screw and hit the die down on a 2x4 piece of wood with the screw on the impact side to loosen the lead.

Re: What height Burris XTR rings for Rem 700? I'm having to order a new set of lows. I mounted mediums on an EGW 15moa base 700 sa varmint and vortex viper 50mm obj. the mediums are too high, i cant get a cheek weld.

Re: Super Sniper Rings? just mounted med rings and they are too high. the swfa ss rings are not the same size as Burris. SWFA doesn't list any specs on their site so you don't know what you are getting. The Medium rings are .607 not 1/2." They told me the low rings are .25 so the lows are...