Search results

If it will dissolve in diethyl ether, it will almost certainly dissolve in acetone.

I use an old box that a motherboard came in. Lay the brass down, shoot it with a few shots of Dillon lube, shake it around and go at it.

Raising the price on luxury items is not gouging.

Re: hornady press broke <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: zuke</div><div class="ubbcode-body">Get a LEE Classic Cast. They can't be broke. The handle will bend long before serious damage will occur. </div></div> I've seen broken linkage on one of...

Re: Removing tar sealant from pulled bullets ? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 280nosler</div><div class="ubbcode-body">There is a compound called Zylene that can be found at Lowes, but it runs about $27 per gallon. I found that filling a tuna can...

Re: Any tips for loading .40 S&W and .45 auto Accurate 2, accurate 5, hodgdon longshot.

Re: Problem finding .223 brass I just tried it with my home address in AZ, a Houston address and an address in Georgia, it seems to be working now.

Re: Dimpled shoulders? Thirded? Seconded the seconding? I suck at meeting protocol.

Re: Dimpled shoulders? If it's about the size of a piece of polishing media, it could be a piece of walnut or corncob stuck in the die. It could also be a buildup of lube, or too much lube on the casings. Have you cleaned the die recently?

Re: Problem finding .223 brass <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TheRedHorseman</div><div class="ubbcode-body">These guys have plenty http://slashk.org/brass.aspx EDIT: had plenty. </div></div> LC 5.56 brass back in stock...

Re: 2400 for 10mm? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: turbo54</div><div class="ubbcode-body">There is one powder to rule them all in 10mm: IMR 800X Look no further. </div></div> I disagree. For me it's all about longshot.

Re: 5.56 reloading question <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: K_4c</div><div class="ubbcode-body">never had any issues running my 550B with a Dillon FL die set... not one. </div></div> I've done a few thousand rounds with my Dillon 550b and Dillon...

Re: Chargemaster = Expensive thrower Since we're bashing on chargemasters, what's the general consensus on the PACT powder dispenser? It's slower than the chargemaster, but is it worth buying at the ~$230 price point?

Re: Which should i use SD or ES SD with a q test to identify outliers that can be omitted. Or if you don't feel like playing statistics games, just stick with SD. Super easy if you plug it into a spreadsheet.

Re: 223 brass in 5.56 chamber ? As long as you do a full length resizing, it will not matter which chamber the brass was last fired in. Well, assuming they were both .223/5.56mm chambers. Twist rate has absolutely nothing to do with the chamber.

Re: .223 brass Stamped WCC or WIN? WCC is always crimped, I've yet to find a crimped WIN stamped casing.

Re: Chamfer the inside flash hole - Tool? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: former0302</div><div class="ubbcode-body">Should there be any difference in the size of the flash hole between the .223 and the .308 cartridges? I'm currently using the...

Re: Load suggestion needed .30cal AP projectiles .308 You'd probably be able to trade them two or three for one in your favor for good hunting bullets. .308 caliber AP bullets sell for silly amounts of money, if you're going to shoot hogs with them why not swap them out for even more bullets...

Re: favorite Powder for 5.56 / 223 using 77 gr SMK AA2520

Re: what is the "lapua " of .223 brass Lake City? Well, there's one place... http://www.govliquidation.com/auction/view?auctionId=6003708&convertTo=USD