Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
After having less than stellar results with the factory 20" threaded barrel, I decided I would try a custom replacement barrel from Crown Ridge Barrel Works. I asked them to take a standard Sendero profile they had in stock (1:8 twist 5R) and custom profile the front for a Surefire MB68AR...
**SOLD** Up for sale is a basically mint condition Bushnell LRTSi 3-12x44 scope with a G3 mil illuminated reticle, 10 mil per turn knobs. Scope body is 30mm, elevation knob includes a zero stop. Great sized scope for an AR15 or AR10 -- and bolt guns, of course. Note again, this is the...
I have a Savage 10FPSR installed in an AICS. As far as I can tell, everything is installed correctly and the magazines feed fine under normal circumstances. However, I've noticed that if I apply upward pressure on any of my AICS magazines (factory 5-round, Accurate Mag 10-round, Alpha Type I...
We finally got a break in the weather up here in WI so I decided to sneak out and zero my new rifle. I started with a stock Savage 10FP-SR. To this, I added a Shilen 24" 1:8 twist stainless 6.5 Creedmoor barrel from Jim at NSS. I had the barrel Gunkoted flat black. Then I dropped the barreled...
Here is my new AR-10A (A10A4CBF). I just can't seem to stay away from .308 ARs. This is replacing a 16" DSA STG-58 carbine –– I just can't seem to get comfortable shooting FALs. As pictured, weighs a shade under 10lbs empty and about 11.5lbs loaded with 20 rounds. It's a bit under 9lbs with...
I have a 16" 6.5G carbine that I'd like to use for hunting whitetail, feral pigs, and maybe even wolves (if DNR ends up allowing this). I have two scopes I can use: (1) Leupold VX-R Patrol 3-9x40 TMR reticle with Firedot, 1/10 mil knobs (2) Nightforce 2.5-10x32 illuminated mildot reticle...
I built this 6.5 Grendel AR around an Alexander Arms 20" button rifled barrel. I had the barrel cut to 18.25" and threaded 5/8x24. I also had the LaRue gas block pinned. The gas system is rifle length, and it works very well with Hornady 123gr Amax factory loads, throwing brass to my 4 o'clock...
Anyone have any info on the new FNAR Match configuration with the McMillan stock? It's interesting to see a semiauto precision rifle with a bolt-action look and feel. ETA: Fuzzy screen capture photo of FNAR Match with 20 round mag:
I've seen this twice now, once with Monty LeClair (SEAL) on Larry Vicker's TV show shooting the FN SSR and once in this photo from the 1st USASOC Sniper Competition: Does this technique of not wrapping the thumb around the pistol grip improve trigger control, recoil control, or...? I'd...
I've just built a .308 AR with a Noveske 21" .308 barrel. I've set it up specifically to shoot the Hornady 178gr Superformance rounds, so it has an Armalite rifle-length gas system, heavy buffer, and Tubbs flat-wire action spring. I have the option of swapping in a Noveske 20" 6.5 Creedmoor...
I just finished building a .308 gas gun on a brand-new Mega MA-TEN upper and lower set. The barrel is a Noveske N6 1:10 polygonal twist 21" stainless tube, and I'm using an Armalite AR10 BCG. LPK is all AR-15 -- the AR10 bolt catch won't even fit -- and I'm experimenting with a Wilson Combat...
Yep, 20" qualifies as a shorty in the .338LM world. This 98B is my first .338LM rifle. The barrel is 1:10 twist. The ergonomics and trigger are great, the brake makes it easy to shoot, and I appreciate the reasonably-priced mags. Thirty rounds of 250gr Hornady BTHP down the pipe so far, and...
Just wanted to drop a quick note that my Barrett 98B 20" .338LM launches the Hornady 250gr BTHP factory loads at 2615fps corrected to the muzzle (80degF, 65% humidity, 900' ASL, using a CED M2 chronograph). ES was 53, SD 15.3. 10 round string.
Will the combination of a Nightforce F1 mounted in a Nightforce Unimount (extra high) be OK for the recoil on a Barrett 98B .338LM? I'm pretty sure the scope will be OK, but I'm not sure about the mount (would hate to have the scope slip in the rings, etc). Thanks.
Since I am an AR expert (read: I have a few tools) and since I know better than the armorers at NSWC Crane (read: I don't even know what I don't know), I thought I'd take it upon myself to precision craft (read: assemble while the kids are asleep) my interpretation of the classic SPR...
Noted gun writer Dave Fortier posted on ARFCOM that Premier Reticles is going out of business, effective tomorrow. Does anyone else have info confirming or denying?
This is what the rest of my carbines want to be when they grow up. Armalite AR10A4C, Noveske N6 14.5" 7.62 bbl | Noveske Crusader, 12.5" 6.8 bbl | LWRCi PSD, 8" 6.8 bbl
For M118LR coming out of the 20" barrel of an M110, KAC uses 2572fps as the MV value in their Bulletflight iPhone ballistics app. Conditions appear to be standard (59degF, 29.92"HG, 0' ASL). Yet I have BH 175gr red box .308 coming out of my 20" 1:11.25 twist 416SS triple-lapped AR10T barrel at...