Search results

My feeble brain is in dumb mode and I can't figure out the speed in AB. Should have used the Magneto Speed but forgot it.would someone be so kind to peruse Quick Load and come up with a Speed? Thanks, Jerry

Has anyone reset sensitivity numbers for for different bullet profiles and weights? For my 308 I left the setting at default which is 14. For 243 I set it at 8 For 223 I set it at 6 I was going to play with the numbers starting at 14 and go down to the smallest number for each caliber I...

A friend of mine shot this group a few days ago. 1st shot top left, 2nd shot bottom left, 3&4 are the two in the right hand lower corner, number 5 is the one closest to center and number 6 is the one at bottom center. Savage .243 Winchester Factory Savage action, with accutrigger...

Gentlemen, I was given 100 processed and primed LC 308 brass. I have a Hornady ogive and shoulder gauge. I checked the shoulder on all cases and they measure from 1.606 to 1.618. The OAL is 2.006 and the web is .469 which is fine. I load for my FAL and Remington 700 SPS Varmint. The shoulder...

What would be the ballstic differences of 308 with varying neck tensions? For example. .002 .003 .004 .005 Other than set back while chambering and pressure with too much tension. Wondering if anyone has documented the results of FPS,deviation,and...

My question for the many knowledgeable loaders on the forum is this........... Rem 700SPS 26" Heavy Barrel, 308, Load, JLK 175's...44.5gr of RE-17...Hornady Match Brass trimmed to 2.2006....Neck sized for .003 neck tension. Using a Hornady gauge, the Ojive length is 2.340 to lands. This gives...

Anyone working up 308 with 175's using this powder? Thought I might try it.

A friend sent me this photo of 1000yd target using 155 SMK's at 2840fps. Rem 700SPS 26" heavy barrel.This is the extent of the info I got from him. Temp was 70 degrees, 1500' alt, humidity 24, Baro, steady at 30.00. With what I had to work with they should have slowed to about 1140 at 1000yds...