Search results

Thanks for the input, 2800 with 162gr out of a 26" barrel seems like a warm load but it is plausible given the 7mm-08 should be able to achieve the same and there is not much difference in the two with oal set at 2.800" (usable powder volume) So the choice powder would seem to be varget and 8208...

Does anyone have load data for a shorter barrel 7mm Creedmoor they can share i would like some onfor regarding accuracy and velocity for 168gr and 162gr projectiles with Varget and H4350 in a 22-24" barrel Regards Sam.

I would be interested to hear how this rifle is turning out for you if you have any updated information?

Thank you for the input guys, this is starting to look very positive. Regards Sam.

Im looking at short and stiff about 22" but am still happy to get out to 24" if needed.

Im getting ready to build a new project 6mm XC and am looking for information regarding this project. I want to run a shorter barrel for portablilty and ease of use it will be used mainly for spotlighting, but want it to be used at the local 1000 yrd range as well. I will most likley use norma...

call_me_E, thanks for the intel mate. Regards Sam

Maybe i should have been more specific about what i was wanting to know. I am wanting to know if the larger grenel case will fit in the standard 6.8 SPC bolt face without modification or if so does the standards extractor function properly with the bolt face relieved enought to enable the...

Cjgemm, I would love to run a PTG bolt but i live in australia and getting a bolt here is a PITA. ridenrunwv, I already have a 6.5x47 Lapua and just want to build something different.

Hi all, I am looking to purchase a Rem 700 LTR in 6.8 SPC in light of converting it to 6.5 Grendel or .30x39 IMP (7.62x39 case). Does anyone have knowledge of how the 6.8's boltface and extractor will function with the Grendel case going from the .422 case diamiter to .441 diamiter of the...

Sonic you mention CIP length .300 Magazines, Are these manufactured by Badger or another company as i have not seen them before? Could you please advise me as to who makes them and possibly give me part numbers. Regards Sam.

I have been looking for a DMS for my new project, a .300 win mag on a stiller TAC 300 action. I have found a Badger .338 lapua CIP DMS (this would suit my desired OAL perfectly). Can this magazine system be made to work reliably with the .300 win mag cartridge? Regards Sam.

Thankyou for your replys, I missed the trigger it will be comming off my old .300 WM it a jewell. I may be considering a different trigger in the future as the trigger is not very wide and i would rather a wider trigger for more feel. As for bottom metal there seems to be so many choices but in...

I have been collecting peices for my next project. Tactical .300 Wm with 26-27" barrel. I so far have -Stiller Tac300 action -Manners T4A stock -Nightforce 5.5-22x56 NSX -Nightforece rings -Grizzly brake -2 Krieger barrels both .30 cal 5R one Heavy varmint and one Heavy palma. Just...

Re: Need help with .300 Rum reamer. Im aware that the best thing to do would be to send a few dummy loaded rounds to PTG and have him make a reamer to fit my application but being in Australia this will be rather difficult. Another way is if anyone has a .300 WM with (X) amount of freebore an...

Im looking at ordering a reamer to buid a .300 Rum and was hoping thats someone could help me out with this. I have spoken to PTG and there recommendation is .168 free bore now if anyone has built or has a rifle with similar freebore can they advise me what the loaded length to the lands will be...

Re: Your .300 wm build Mine is a factory rem 700 VS restocked into a Manners MCS-T4A lugs lapped and barrel recrowned. I have a Kriger 5R 1-10 barrel and oversized lug ready to go when this barrels is worn out. It has nightforce rail, rings and 5.5-22x56 NSX on it. these are some pics of...

Hi all i dont post much on here as i tend jsut to read and and try to absorb what little information my brain will accept. I have been reloading now for 19 years and still consider myself to be just an amature. now to the point, i have recently started loading for a .300 winchester magnum that i...