Search results

I should have added, I have a 16" Ruger SFAR 308 win.

I picked up an Aero Precision M5 receiver for a good deal. I would like to build a 6.5 CM in a short barrel, not in a long barrel. I have bolt guns with 24" barrels. I'm looking at the Ballistics Advantage barrels in 16 or 18 inch. The reason for the shorter barrel is I will be running the gun...

Re: cfe powder-308 +1 for the 175 SMK and CFE 223

Re: 7mm Rem Mag 168gr SMK Load Data PM sent

I'll be going to Colorado for the second gun week to hunt elk. The Nosler 180 Partition bullet is what I have picked out to develope a load. I have a IMR 4350, H-4350, RL-17, RL-19 and several other powders. I'm developing the load in Central Florida where it's hot and going to be hunting...

Re: Bullet Weight for Factory 700 .308 5R Milspec Here is a good recipe (not mine credit goes to "caseyru") 175 smk 47.5 CFE223 2.828" OAL Neck sized brass (remington) CCI BR2 primer brass trimmed to 2.008" We shoot this in our Remington 5R mil spec

Re: Is my 308 chamber short? 5/16"-36 tap (had to special order) 9/32 drill

Re: Quick load I have Quickload on my computer. I really like it.

Re: Powders for 7mm Remington Magnum Here are some Quickload numbers for the 7mm RM sierra 160 Gameking COAL 3.290 H2O case capacity 82.00 gns filling ratio 105.2% 73.2 gn Retumbo 51656psi Propellant burnt 100% 3019fps How does this compare to real world numbers.

Going to be handloading for a Remington Sendero in 7mm Remington Magnum. It has a 26" SS fluted barrel with a 9.25 twist. It will be used in two different places, North Florida for Whites from 200-300 yards. Out west for Elk, don't know the yadage out west. In looking at Quickload, RL-25...

Re: Is my 308 chamber short? Because I handload for several calibers, I bought the tap and drill and had a local machine shop drill and tap some fired cases, problem solved.

Re: Is my 308 chamber short? If you are using a Hornady modified case to measure with, take a #20 sledge to it. The Hordady modified case for my 300WSM almost drove me to drink thinking my chamber was to short.

Re: XBR 8208 in .308 load info anyone? (also 223) 168 SMK 43.0 gn. IMR 8208 XBR New R-P Neck Size with Lee Collet die CCI BR-2 primer 2.225" ogive .700" group @ 100yds 2669 fps

Re: Finally a PIG!!! :D Great pics. Tell us how you took the pictures and about the brake.

Re: 1000 yard load Here is my recipe for my 5R Collet neck sized R-P brass trimmed to 2.008 CCI BR2 primer 43.5gns varget 175 SMK 2.232" ogive, 2.808" COAL 2567 fps Also try this one Collet neck sized R-P brass trimmed to 2.008 CCI BR2 primer 47.5gns CFE 223 175 SMK 2.252" ogive, 2.828" COAL...

Re: Hodgon CFE 223 range report and analysis help. caseyru I shot your load today at the range. I did two loads, 47.5 & 47.4 Both groups were 2"w x 1.8"h, I like the 47.5 group best. I'm going to tinker with the OAL a bit. Oh by the way this was at 300yds. On a funny note, when I was...

Re: 180gr. Nosler Ballistic Tip - .308 win - Hunting Case prep, is one of the most important steps. Consistency is key. Also get in the habit of checking seating depth off of ogive not meplat. The ogive is alot more consistant. Try to stick with one brand of brass, I like Remington...

Re: Hodgon CFE 223 range report and analysis help. Thanks caseyru.

Re: New power case trimmer WFT.... I have the WFT in the 308 class, works good on full lenght resized brass, will not work on neck sized cases. Still a good trimmer.

Re: Hodgon CFE 223 range report and analysis help. caseyru, thank you for your report. I to have a Rem 5R, 175 SMK, 2 pounds of CFE223. The 47.5 looks great!! What is your COAL?