Search results

I dont see many Left hand action wrenches to torque barrels on. What are you guys using that is a good solid LH wrench to torque on 80-100ft lbs Casey

I have a friend that wants to put a brake on his 7 mag. barrel is .506 at end muzzle and wants to put a 1/2-28 tpi brake on. Im pretty iffy about it being to thin but thought I'd ask and see what you guys thought. Thanks guys, Casey

I was looking to pick up another 100-500 bergers for my 260 but cant find anyone that has them in stock. Any one know of a place? Thanks guys, Casey

I called and ordered a .187 lug and a couple extractors about 2 weeks ago. Today i called and asked if they had shipped but they said the lug was 2 weeks out. When I asked to change it to a .200 lug (they had in stock) she said they could but would charge me a "change order fee". I wasn't quite...

Im milling a laminate wood stock, the laminte wood dosent mill real well. What are you guys using for cutters to chew thru this stuff? Thanks guys, Casey

I have an older savage that has the dimple in the bolt and the bolt head has a milled out spot where it slide into the dimple. Savage dosent put the dimples in the bolts anymore, instead of milling the bolt head I was going to remove the dimple in the bolt. Anyone else run into this?

I have take off barrel from gunwerks a guy wants spun up on his 700 action. Not a big deal but I'm dialing the barrel in off the chamber with a long stem indicator (its a. 0001 but with the long stem. 0001 = .0004) I get the rear of the chamber to. 0002 or less and move to the neck area and it's...

Where is a good place to buy some 3a ring gauges? Casey

I have done a little searching and cant find a lot of load data on this caliber. Most of what i can find is Retumbo & H1000, what are you guys using and seeing results with? Thanks guys, Casey

I have a Mcmillan stock with molded in colors, It will be getting cerakoted but has some small areas that need to be filled with body bondo, sanded and then primered before cerakote. I have used PPG epoxy primer in the past but I would like to hear what you guys are using. Thank you guys, Casey

I will be shooting 190-210gr Berger Hunting bullets. I have some retumbo and got some Ramshot magnum, anyone tried these or have any info? Thanks guys, Casey

I know this isnt necessarily a gunsmith question. What are you guys using for a vinyl cutter to make your own stenciles? I have been looking at them and figured I would ask. Thanks guys, Casey

1. I have been looking around, found a couple places that carry 300 Norma Brass. Where are you guys getting yours and what are you paying for 100? 2. I can't find any forster comp seating and FL dies. Everyone seems to be out, anyone have a line on some or have some they would like to sell...

Got this done, what do you guys think? is there anything that could be better? Thanks guys, Kc

How many of you guys use male stenciles for patterns? I used male stencils but dont like layering cerakote up when doing camo patterns and such. I have been using female stencils but is very time consuming taping off the part and spraying just that area. How are you guys doing your patterns...

Ive done quite a bit of reading, some say SA some say LA. I would like to feed it out of a AICS style magazine and it needs to work. I will shoot 168-180gr bergers and will buy the reamer needed for the right FB. Thoughts? Thanks guys, Kc

Im using CRC brake cleaner non chlorinated, it evaporates pretty quick. I thought about draining my tank every time Im done. What else are you guys using? Im in a smaller garage and not sure about fumes and such as im running a torch and other things. Thanks guys, Kc

I'm looking for a seal I can put on the under side of my lid to help stop some of my solvent from evaporating. I have looked around and cant seem to find anything. Anyone have any suggestions or know where I could buy a seal to stick on there? Thanks guys, Kc Heres the tank lid Im using...

I put together a 7 mag on a surgeon 1086 action. I was having some misfires (light primer strikes) I switched from wolf to CCI primers and it helped. I have now started on a NEW batch of brass, and 1 out of 4 may go bang (light primer strikes again) I tried replacing the firing pin spring and it...

I have a Short action that was a .308, looking to true it up and do something a little different. I measured the raceway with calipers and getting .7145-.7150. I was going to order some bushings from PTG so I could dial it in off the raceway. Whats any one else coming across for diameters...