Search results

Re: Heli hog hunt. Red dot or iorns? Red dot for sure. From a Helicopter simulation pad it is hard to hit stationary targets with a red dot. I'd do even worse with irons. Aimpoint gets my vote.

Re: Iphone App that has Ballistic info and Mildot Shooter has the holdovers and windage in mils in the solutions menu. I have played with it a little on a 14.5" barreled AR-15 and has been fun.

Re: berger bullet manual shipping When did you pre order? I pre ordered a week ago and haven't gotten any tracking yet.

Re: Bumping shoulders, how do you know? Here are a few thoughts I'd leave on minimal headspacing bumping. If you are not paying attention to your headspacing, don't bother finding the lands with a specific bullet. Just full size, load the bullet seating to mag length, and go. The shoulder...

Re: Need help....Shooter's Software Go to the bullet/ load screen. Select "Edit" the load and select the load that is not zero. Scroll down to the "Zero Data". Sellect 200 for range and make sure the "Zero Hieght" and "Zero Offset" is at 00.00 (true zero, vs zero + 1.5" @200 ect.). Select...

Re: Winchester model 70 Why would you do anything to that gun?! Guys spend thousands of dollars and massive amounts of time on these ultra cool precision rigs and are searching for the results your getting. They might be able to hang in out further, but could also anchor a small ship. Your...

Re: Berger 7mm 180 VLD, Will my 1/9.5 stabilize? Good to here he didn't have any issues. I should be close or at 2800 fps with this set up.

I've got a 7mm RM that has a 1/9.5 barrel on it. The Berger 180 is saying 1/9 or faster. Opinions on whether I'll see any problems or lack of accuracy? I've ladder tested Bergers 180 hunting VLD at 300 yards and everything looks good so far. I'm loading up another detailed test before I start...

Re: Ladder testing. Well I got out to do the shooting. So freaking foggy, it was hard to pick up the target at times. I'm working on the charges per shot number now.

Re: Weird max OAL length reading on my gasser <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hdbiker1</div><div class="ubbcode-body">A quick way to recheck would be to chamber a round and then gently unload to check for land marks on the bullet to see if you...

Re: OAL of 7mmRM + 180 Berger? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MALLARD</div><div class="ubbcode-body">3.290? </div></div> That is the OAL that Berger gave me for the 180 VDL. Standard for 7mm RM in all the manuals too. I think mine are closer to...

Re: Ladder testing. I've got .5 grain increases and going to shoot two test to run next to each other. So two rounds per charge weight. Thanks for the help. Raining a little now. I'm hoping it slows down and dries up some for my shoot.

I'm running my first ladder test on a 7mm Rem Mag using Berger 180 grain VDLs. It's a Winchester M70 with a light (sporter) 26" barrel. The VDLs are set right on the lands in front of H1000. Fire formed Winchester brass and Federal 215M primers. I'm starting low at 58 grains and working up to 68...

Re: What's my initial setup cost for .308? I was shooting sub MOA with Hornady Match 68 grain .223 through a varmint AR-15 with a $450 investment in reloading equipment. And with that set up, I loaded 3K of M193 (that was ten rounds, 1.3" at 100) and 2K of 9mm ball that my Glocks loved. I...

Re: Finishing the finish on a quilted maple stock Well I talked to a local guy today and he helped me a little. I am going to try to hand rub a coat or two in. Then I'm going to throw a coat or two of wax on and call it done. Thanks for the help.

Re: Base for Win M70 LA Well, The DNZ was ordered. I should have it on the gun and making some noise this coming weekend.

I have a rollover sporter quilted maple stock that I'm finishing. It has been bedded to my action (Win M70 7mm RM) and sanded to 320 grit. Went with Birchwood Casey Sealer Filler for two coats. Tru Oil from there sanding back to wood with 0000 steel wool between each coat. I've got 9 coats of...

Re: QD rings for precision? This guy breaks his own (I don't condone this) but it shows one of the weak spots of the Arms. Arms throw lever destruction

Re: QD rings for precision? I have a LT-104 with Sightron glass on a Varmint AR-15 and it returns to zero so well, I can't tell any change in POI after removing/ replacing it multiple times. Same with a LT-150 but it is just on a 14.5" carbine. If I was to put up the money for QD rings, I'd...

Re: MA-TEN vs Armalite +1 for Rainier Arms. I'm building a .308 and 5.56 Mega Mono upper/ billet lowers for a buddy. The 18" UltraMatch barrel is being dimpled and shipped by RA now. Those uppers are really freaking light. You have to pick one up to even begin to understand how light they are.