Search results

As usual Lapua will have thicker case walls then hornady or Nosler resulting in reduced case volume, adding the same amount of powder in both will give higher pressure in the Lapua cases. Also freebore and bullet seating depth can change pressure and powder capacity some on its own. So if your...

Not advocating brand loyalty, I use them because they have a few advantages some of the cheaper ones don't from my experience, they all do work after all it is a simple funnel. And yes the funnels will more easily make the powder swirl into the case if they are slightly tilted, a straight drop...

A drop tube will help you quite a bit, have not really taken exact measurements though. As a example my 308 with virgin Lapua brass, TTSX 150 gr, COAL 2.8776,.001 neck tension, with N150 using a Satern funnel i ran 46,5 grains, using a 10" drop tube from 21st i run 47,5 grains, while seating...

It's possible to fit a barrel nut to a M 70, pretty common on M98s witch has the same type of extractor. Can order one for 150 dollars and have it delivered within a week for myself. Will of course still need some machining to fit. Not saying it's the best solution available, a WIN M70 with a...

Just glad to be able to help, having rain and 60 mph wind now so not much else to do anyways. The setup looks good. Will send you a PM tomorrow with a proper shopping list and some wiring diagrams.

I was reading your post, and i thought i should try to give you a helpful response. The description of it leaves a bit for interpetation, and english is not my first language. I do currently work with automation, and electrical equipment for industry, so i know a thing or two about this. I do...

Honestly the cases are very similar, just 5-6 grains of difference in powder, same as the difference between a 7 saum and wsm pretty much. The SAUM cases are more well suited to run in a SA, and have a bit longer neck. The 270 and 300 wsm cases have slightly longer neck and less internal volume...

There is a modification or two you can do to the classic style AI bipods, you can get a friction lock for them to reduce the slop/cant in the head of the bipod witch is really helpful feature with this model. And you can get a pair of big rubber feet for them. The friction lock is sold by...

Okay, your shooting a caliber with a notoriously short neck, using heavy bullets and slow burning powder. Forget about reloading manuals and recommended trim lengths, 99,9% chance it will not match your rifle any way. Remember that recommended trim length might or might not have been optimal...

SIg had a own model a few years ago not ssure what happened with that. Accurate mag ass mentioned, and GRS that kelby imports are making a aluminium chassis.

I do not think 300 has intention of using it on a cnc, from what i have seen before at least he has a normal lathe. I highy suspect he is looking to mount it to his carriage, using it as a reamer holder with a ER 32 collet as Chad mentioned earlier in the post. Mounting it directly to the...

The TRG trigger fits as mentioned an is probably the best choice if your not looking for a bench rifle. Would be my first choice for a general purpose rifle, and is a very nice 2 stage trigger that is reliable. THe old model CG jackson 21 fits the T3 and are excellent 2 stage triggers,but hard...

Your cases does not look to be camfered and deburred, witch means the trimmer will leave burrs when you trim the cases. ANd yes STM cleaning can certainly peen your case mouths and cause similar results, fill it well up with water and run it a shorter time, should help. STill want to chamfer and...

If the money does not matter too much, i would go with the competition neck die set. It does all you need as it consists of the comp bullet seater, body die and comp neck die. You have a bit more adjustability with the comp set, and the ability to partially neck size the cases. The type S FL...

21st century shooting as suggested,the floating design works very well, all parts are of high quality. And you can use both 21st,PMA tool and Sinclair expander mandrels with it.

The standard McMillan sling stud spacing is 3.0 inches. The Seekins SRS with 3.0 spacing for McM stocks and The Accu-shot BT 17 rail will fit(2,2-3,5) will fit directly. SRS Rail, McMillan 3.0" Hole Spacing - Rail Accessories - Parts & Accessories Accessories: BT17 – 4" 1913 Rail from...

Nosler brass, is produced by Norma US with a Nosler headstamp, then prepped/sorted to some degree. If your willing to cull some cases then you can get similar consistency by buying in bulk and do the work yourself. As for the quality of the brass itself it is exactly the same. RL22/ Norma MRP...

It's got a standard McMillan screw spacing i think. The texture is marinetex, and looks like it is coated in Black T. Sanding it down is possible, but you got to be a magician with it to make it look nice and clean after. What you desire if you need a rail is a flat contact surafce with the...

If your resizing and cleaning anyways use some water to soak the primers a while and push out gently with a decap die. Shake out water, lube and size then clean them all.

A Seekins SRS or Atlas rail, with screw spacing for McMillan stocks is the best way. Would be easier if you asked Mike to add his rail option to the stock. Another non permanent option is a stud to rail adapter, if you dont want to mess up the perfect exterior of that stock. CUrrently do not...