Search results

I did the same type test with Winchester brand .243 brass, in a .243 Ackley. I took five cases and loaded them over and over. I think my load was 47.5 grns of H-1000. I full length sized after every shot but never annealed the necks. I was using Fed GM match primers. After 25 loadings the...

It is a straight up plastic stock. I own one in 7mm-08, bedded it with acraglass resin/gel and added metal flakes. It hasn't come apart and that was probably fifteen years ago. You will not find a more comfortable tree stand rifle, works great for walking/stalking, too. Even with a scope...

I use a metal cutting bandsaw for cutting all of my cutlery steel. I belive my blades are 18 tpi, run as slow as your saw will run. I cut D2, A-2, 0-1, 440, 52100, S-7....all types, as long as they are annealed. Save yourself a big headache and by the best quality blades you can find. I know...

I just resize the neck to remove any dings them chamfer and deburr. I use a neck die if I have one, or back a FL die backed out so that the neck at least goes over the expander button. I know a guy that dosen't do a single thing to new brass other than load it....and it shoots nasty little...

Have you measured one of the fireformed cases(from the shoulder) then sized it as much as the die/press will allow? Now check to see if you are moving the shouler back. If it shows no set back you may have to shave the base of the die. I had this same thing happen when I necked 308 Lake...

This is not exactly what you asked, but may help. I have loaded a 7mm-08 (140 grn) with IMR 3031, it worked great in a 20" barrel and gave good velocities. I can't remember the exact charge. Best I can remember it was in the 2850 to 2900 fps range. I believe PO Ackley listed some loads with...

The one thing they have over lead bullets is penetration. They stay together better and generally penetrate deeper. For general use the positives probably don't outweigh the cost. Solid copper bullets are used in premium hunting loads, glass penetration rounds, and in larger calibers like 338...

He probably means that is the first one that stayed in the animal. I'd say cost would be a big factor, at least it would be for me. Accuracy wise they generally shoot very well. I've tested the barnes (.224's) on deer sized game, and never recovered one either. They will shoot through both...

Wipe Out foam and let it work a couple hours. I only use patches and jag, rarely ever use a brush...if I do it is nylon.* I'll use Iosso paste to remove carbon and to polish throat area, only after 250-300 rounds.

You will have to measure one of the fired cases to determine which version you have. Hopefully it was chambered with a reamer that matches a set that Redding makes. I had to send five fired cases to Redding to find out they didn't make a set that would "fully" full length size my brass. Mine...

I can find Lapua, Norma, Nosler but need Winchester. Any ideas? Thanks, JSS

I tried 4831 sc, can't remember why but switched to H4350. I may not have been getting the velocity I was looking for with the 4831. Both powders should work just fine. What stock did you put it in?

How is it working out?

Yeah, its been a while since I had to fireform brass. If things get worse with the brass and powder supply I'll give it a try too. Hell, I can't even find Winchester brand 243 brass....

I don't use the cream of wheat, poly fill, wax, or backward facing bullets method of fireforming. I just load and shoot and they are almost as accurate as the formed loads. Way easier than most people think.

Mike Davis chambered mine. I am running 45 grns of H4350, Remington brass, Fed 215's at 2.820 w Hornady 140 bthps. 26" barrel at 2935fps. Fire forming load: 44.5 H4350, everything else the same. If I use CCI BR primers I bump the load up .2grns. That is for the fireforming and match load. I...

Mine too. I think he designed it to mag feed from AI type mags. I was really lucky with mine..it shot very good from the first day. I bet my loads will work in yours too. Mine is on Stiller Tac 30 in an AI 2.0

Did you get reamer from Dave Kiff?

I'll check my notes and post some loads. H4350 is my favorite powder. Fed match, or CCI BR primers. 140 Hornady bthps are running 2935 out of 26" Kreiger. Remington brass will have primer pockets last 3-4 loads on average. Fireforming loads shoot almost as well as formed cases. My oal is...

1 lb. and 8lb jugs showing out of stock now.