Search results

i believe they run over $20K, in which case I would buy a coupe GAPs with sweet glass, a sick ass spotting scope and then training and equipment ha.

I have done it about a dozen times with Fed 210 primers and worked perfectly. I just made sure to go real easy and steady so as not to piss the things off.

Boogaloo thanks for the video, that is a solid video compared to some I have seen perusing the interwebs. I am going to get some 700 tempilaq and set up my drill and torch in such a way as to maximize the consistency case to case. Hopefully it works out well, but I basically know in the future...

wow that video is scary, even with a few searches and quick reads you find out that what he is doing is very wrong and dangerous. Thanks for the input guys, and hopefully the guy who made that video hasn't fallen victim to his practices.

Well if it is the Mcmillan cheekpiece setup you could always get the DBM inletted one so you can have the KMW cheekpiece system installed, as it is (seemingly) a much better system than the mcmillan one. I have a SA A3-5 and love it but the cheekpiece loosens after some shooting and needs to be...

Hey guys, Tried annealing some brass today and used the method of using a socket on a drill and a propane torch and dropping them into water. I used some scrapped cases as practice for the timing and other variables and got to what looks to be pretty consistent and satisfactory. what do...

Jewell set to 1#. Absolutely love it.

Just tried that and it definitely remedied the situation. thanks for the feedback

Hey Guys, I got some wheeler levels for leveling my optic with my action and, well, it is a bit odd. I thought it was pretty good before and now when I have a level on the action rails and one on top of the top turret and they match up, the reticle looks totally cockeyed when you look through...

Thanks, that was the only picture i got but the others were closer to 4.5" at the longest. The rifle specs are: Rem 700 SPSvar 308 26" McMillan A5 bedded Badger M5 Jewell set to 1.5# EGW 20 MOA base Nightforce NXS 3.5-15X50 F1 nightforce light rings This was the first group I shot after...

Hey guys, Went and shot for the first time past 100 yds and wanted to see how i did at 300yds. The wind was about 30knts with some gusts getting closer to 40 from the 2oclock. it was about 75F. The wind wasn't so much messing with my shots as much as it was basically kicking the shit out...

Here is my Rem 700 SPSVarmint in 308. The rifle overall is a heavy baby at 16 with an empty mag, and I don't hunt with it.

Hey guys, I am looking to add a surefire brake to my Rem700 SPSVarmint in 308. In looking at all of surefire's models it appears the ones that fit the varmint contour barrel are the 338LM caliber brakes. Will using one of the 338LM brakes have any negative side affects when used on a 308...

I have not posted much here, but I am quite the lurker, and after 40+ pages of checking out all these awesome rifles I had to post mine. Rem 700 SPSVar in 308, 12"twist, 26"bbl McM A5 bedded NF NXS 3.5-15x50F1 NF rings EGW 20MOA base Jewell trigger set to 1.5lbs Custom knob...

Re: Rem700 SPS,LTR,PSS Precsion Rifle: Lets See Em'! Here is my baby. Rem 700 SPS-Var. 308 26"barrel McMillan A5 Nightforce NXS F1 MIL/MIL Jewell trigger set to 1.5 lbs BadgerM5 bottom metal EGW 20 MOA base Nightforce rings triad stock pack harris bipod.

Re: First time reloading and issues <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: shoot4fun</div><div class="ubbcode-body">I had some factory loads and here is what I measured: Hornady 168 TAP is .334" loaded; .014" neck thickness. Federal Gold Medal is .338"...

Re: First time reloading and issues <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: shoot4fun</div><div class="ubbcode-body">With Lapua brass I use a .335 bushing. Do you not have any factory loaded 308 in the shop? If not, just go down to your favorite gun shop...

Re: First time reloading and issues also, is .333 range common?

Re: First time reloading and issues ok, i will have to get some standard dies and make that happen. the .315 was a tight fit but it definitely seated a bullet surprisingly. I imagine its a very tight fit and would potentially lead to some spiked pressures.

Re: First time reloading and issues well in using the .343 and .344, the bullet is moveable with just finger strength, while the .315 is very snug and not moveable with your fingers. and yes these are hornady once fired brass unfortunately i dont have any of the factory ammo left to...