Search results

NF has a strict advertised price policy not a sell price policy. Make some phone calls.

I was going to try them in one of my barrels, but I really don't have the freebore to run them. I actually have a box I am going to sell if you are interested. A couple of guys I shoot with have used them with mixed success. One shot a clean at 600 yds with them. If you aren't on top of your...

2730 fps for a 185 is a good goal. It will keep you at mach 1.2 at 1000 in just about any altitude at any temp. If you don't think you will shoot at a lower altitude or in cold temps, run JBM and see what it says to stay at 1.2 at your altitude and temps.

If a guy can't dick around with some whatthefuckery, what's the point?

Thanks. Makes perfect sense.

Isn't the turning mandrel larger than the expander mandrel?

Have you tried a Lee collet die? It does a nice job of this in one step.

I have shot probably 30 lbs of that powder. I got the best accuracy and the lowest sd around 45.5 to 46.5 grains with Berger 185 OTM in a 30" barrel, F/TR gun. Velocities were 2725 to 2825 ish. It will produce some impressive velocities. It is quite a bit more temp sensitive than Varget. I...

Clear View Levels If you want precision, this is it. They test them a surface plate and calibrate the bubbles. It doesn't fold up.

If you spring for a NF Comp, you won't go wrong. You could sell it and lose very little money if you didn't like it, which is not likely. It is also light and won't eat into your overall weight allowance much. I would go Ken Farrell or NF Ultralight rings. The used NXS would be a good...

Do you have any 600 yd F Class matches near you? I would get a rear bag and go shoot it just like it is with your Harris bipod. Start shooting some matches. Look at other shooter's rifles. They will likely let you get behind their rifles and maybe even shoot them. Ask questions about...

I certainly agree.

Subtends to scale at 22. It has an "R" there. The NP-1RR doesn't have hash marks. It sounds like you might be describing NP-R1 reticle which has 1 moa hash marks on the vertical stadia and 2 moa hash marks on the horizontal stadia.

No matter how much force you put on it, it will only reduce the neck to a certain size. Whatever force it takes to achieve that is all you can use. After that, all the extra force is doing nothing put damaging your shit. Measure a neck od or id. Put in the collet die. Measure it again...

It is just creating more head space which isn't needed and isn't a good thing. You don't want to size your brass and move your shoulders .005". Moving them .001" - .002" is better. I sometimes body size new brass, but usually I don't even do that. I trim it, chamfer it inside and out, load it...

Maybe I read this wrong, but did you bump the shoulders on virgin Lapua brass? If so, would it not chamber in its virgin state? This would be odd. I don't shoulder bump new brass.

I have a set of Farrell 30mm ultralight low rings I will make you a deal on if they will work for you. They were too low for my scope on my MTU barrel and I had to go with taller rings. The Farrell standard bases are tall, but if you use them with their rings they work out fine. Their low...

FX-120I - Cambridge Environmental Products Inc. Scientific Distribution Network - Laboratory Supplies, Scientfic Equipment Call these guys. They have good tech support. They have nice check weights as well for reasonable price. They had the best price when I bought mine. It was cheaper than...

Varget is definitely too fast for 185's. Send me your Varget. I promise to not shoot 185's with it. Seriously, I won't shoot 185's.

Here is a Sightron and a T36 for sale. WTS 2 scopes