• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Search results

Search the forum Search Articles
  1. M36

    AR9 Help

    Just watched a video and had the same problem the guy in the video had. I believe the rear of the case is getting caught on two corners of the bolt part that pushes the round forward and created the two shiny marks on the case. Prob explains why the steel rounds wouldn't work. I thin if I can...
  2. M36

    AR9 Help

    I bought an AR9 upper at a gun show with all the assurances that it was fine. :ROFLMAO: When I tried to shoot it with the Endomag inserts in a Pmag, the round would bury itself in the top of the chamber and not completely feed. This resulted in a "smile" like mark on the brass case and the...
  3. M36

    6mm Rem w/ Hornady 105 Match BTHP Seating Depth

    Thanks for the response. I use the same bullet, my measurement is 2.600 to the ogive. Really Fuzzball? No magic number at all? None? Sigh................ You forgot to leave a comment about your M77.
  4. M36

    Does a ladder test verify what the objective muzzle velocity will be?..

    Correct me if Im wrong, it looks like you have done a reverse OCW. Shoot for distance but verified at 100 yards. Very interesting, nice shooting!
  5. M36

    308 win, what's your favorite IMR4064 recipe?

    Just started over with Lapua brass. 175 SMK 42.1 4064 210M Lapua brass OAL 2.825 Last time I shot to check the load I was getting an average of 2650 from my Rem 700 SPS Varmint and .295 MOA vertical spread at 300 yards.
  6. M36

    6mm Rem w/ Hornady 105 Match BTHP Seating Depth

    I have some of these loaded up to shoot from my Ruger M77 MKII and have seated them to the Hodgdon reload data for 105 AMAX', at 2.825. Does anyone have a Ruger M77 that have loaded these? Im curious to know your seating depth.
  7. M36

    GemPro 250 Review...

    Got mine last week and seems to be working good. I turn off the ceiling fan when I use it and removed a fluorescent light. I do let it warm up for awhile before I use it. I use the small pan it came with to drop the charge, add with a trickler and remove kernels with the plastic tweezers. I try...
  8. M36

    Recommendations for Chronograph

    I cant recommend one but I can recommend one not to get. I opted for the cheap way out and got a Chrony F1. I would say it works 75% of the time with rifles and 0 % with handguns. At least with my trying to determine speed with my .45 loads. It is absolutely horrible and was an absolute waste of...
  9. M36

    D.I.Y. Rear Bags

    Tag
  10. M36

    DIY Shooting Mat and Rear Bags:

    Just tagging it
  11. M36

    .308 Velocity Increasing With Temp

    Out of curiosity, I checked two different speeds at two different temps with my Varget load and they work out to 1 FPS difference exactly. This gives me something new to pay attention to over the temp spreads that I shoot at to see if I have the same consistent results. Yep, thanks Graham!
  12. M36

    DIY Cheek Rest

    After thinking of this and what I had on hand, it took about 5 minutes. I sure feel cheap. Makes my stock almost invisible now. Dont know how durable it will be, but its there. Pool noodle, belt form waders, stock sock.
  13. M36

    Range Report Whats Acceptable Grouping?

    For some reason I have it in my mind that shooting sub MOA at any distance is acceptable. I think I have finally developed a couple loads Im happy with for my .308 and Im moving on to the next stage. Yesterday I shot my sons rifle at 300 yards. The vertical grouping was 2.587, horizontal 1.97 ...
  14. M36

    .308 Velocity Increasing With Temp

    Thanks hondo!
  15. M36

    .308 Velocity Increasing With Temp

    I shot the other day when the temps were around 55-60 degrees. The average velocity from my load was 2699. I got a pretty good vertical spread and was happy with it. While researching projected velocities due to temperature, I found that on a 100 degree day, that velocity could climb up to over...
  16. M36

    Recipes for 700 SPS Varmint 26" .308?

    I dont know. However, the temp when I shot this on the 10th was around 55-60 degrees. Now Im wondering if the load will be OK when the temperature starts to climb and velocity increases. Anyone know? The projected velocity at 100 degrees is supposed to push it up over 2800 FPS. I dont know if...
  17. M36

    Recipes for 700 SPS Varmint 26" .308?

    Edited: Recheck my info and this is the load Im going to work with. I just finished shooting a test of some different Varget loads out of my Rem 700 Varmint and worked up to this: 175 SMK 42.5 Varget CCI Large Rifle primers LC LR brass 2.810 OAL 2699 FPS average
  18. M36

    Changed powder, now shooting low?

    Arka, I dont think anyone is questioning your marksmanship. From my old fashion ways of using an accurate round for hunting out to 300 yards or so, I would be happy with your 41 gr load and that is what I would use. But for long range shooting and trying to change my ways of thinking about...
  19. M36

    ??? house fire??

    What a horrible way to start the new year. Sending some prayers from AZ to you and your family.
  20. M36

    .308 w/ IMR 4064 and 175 SMK

    This is interesting, I'm trying to come up with a load for my Rem 700 SPS-V 26" and shot 41.8 IMR 4064, LC LR brass, CCI200 primer, 2.800 OAL and got an average 2547 FPS. Shooting 41.7 IMR 4064, FC brass, F210M, 2.800 OAL my average of 5 was 2584 FPS with the same rifle. Both using 175 SMK's...
Top Bottom
Back
Home
Forums
Merch
Alerts