Search results

308 Win 748 @ 45.0 165gr Nosler Part WW Case with WLR primer 2.800”

In my MK 12 and 16” Reece rifle my hunting load 70gr TSX with TAC @ 26.0 with LC brass and CCI 41 primers excellent accuracy !

I would think the KAC rear sight ranges were calibrated for M855 ammo using the heavier 62gr bullet than the 55gr of course you will have to adjust the evelation knob accordingly for 55gr. Great info already given !

I use W748 with 165gr Fail Safe @ 45.0 in 308 win. Used as WC750 powder then sold to public as W748 was widely used in M852 for short while until going to IMR 4985 in M852. I have a good load with 165gr FS and W748 but this powder will never replace my 4895/4064/RL15/Varget in 308 Win bolt

The new MK318 load from Federal that replaced the LC ATK RL 15 Alliant load was IMR 4064 @ 41.745 with Fed 210M primer and FC military brass documentation shows. 2.810” In my current powder lot of IMR 4064 indeed 42.3 duplicates the MK 318 Mod 0 load.

Norma 203B is almost identical to Reloader 15 grain for grain. Excellent with 168gr and 175gr in 308 Win. My favorite is 45.4 with 168gr. Norma 202 works great with lighter bullets 150gr in 308 Win a great powder that was very similar to Reloader 12.

Norma 203-B is the powder but is almost identical to Reloader 15 grain for grain and performance. The Reloader 15 kinda got a bad wrap in Afghanistan going from low altitude to high ridge altitude and different temps. Also the original load was for bolt guns was too hot for older gas guns. They...

Blow it up with your fingers to read

This is after Federal received the contract. I don’t even think they produce M118 any more. IMR 4895/ WC 750. I really liked RL 15 over the years in the 308 Win

Load data from M118 LR

Shipping list of M118LR shows load data !

A lot of good loads already posted One of my favorite to load the 308 Win in Bolt Gun. LC Brass and 44.0 of IMR 4064 with 168gr MK has been one of favorite for years. Also 45.5 of Varget is a outstanding load along with Reloader 15 @ 45.0.

The Large knob KAC 600m sight and the M4 folding front sight are Tier 1 top of the line products.

I built my MK 12 Mod 0 completed in 2012. It took me 2 years to complete with the help of Compass Lake F. White of Fort Campbell fame and High Caliber Sales a gentleman that worked for Crane on the development of the MK 12. So a lot of parts from PRI, ARMS , Op Inc, Douglas and Leupold TS-30 and...

Thanks Got the knight M4 front sight from Sharks and the Knight Large knob 600m rear sight off gunbroker. Only thing left I need a Vltor IMOD stock in TDE and I will done with my modifications.

That is a great price ! Thanks

That is the front I want 99051 and the Knight Large knob 600m rear for my Reece Build and it will be complete except for the flashlight decided on Streamlight Pro TAC and the good switch mount on top from Cloud Defensive LCS

Far left propaganda using the media again for fake news

That is the best price I have seen so far ! After the front I will be after the Knight 600m rear sight.