Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
1 MOA would be expected and very doable. Remember most units still have a digital zoom (like 3.5 base mag with 4x zoom to end up 14x). Also when sighting in use a the smallest handwarmer for your aiming point. The increments of the x and y adjustment for sighting in can be coarse sometimes...
6 dasher no turn reamer 27'' 1:7.5 Krieger Defiance Deviant Short Action New Alpha OCD Brass Small Rifle Primer CCI BR4 Primer 32.2 Varget 2970 fps 3.0 S/D 4.911'' 5 shot group at 1K IBS Match off bipod
Also forgot to mention that I typically run .002 neck tension in my reloading process. Higher neck tensions could create some problems scarring projectiles when seating.
I shoot alot of 400-1000 yard matches and chamfering and deburring new brass is key to small groups. My process is to trim, chamfer and deburr using a forster 3 way cutter. Next step is to spin the cut end of the neck on a piece of red scotch brite to clean up the cut end so its smooth to the...
Worked up a quick load for mine this weekend. Found some 150 nosler ballistic tips, varget, 210M and Lapua brass and gave them a shot. All shots were from bipod at 150. Not too bad for stock small light weight rifle. Shot sub 1” at 150 pretty much anything I shot through it.
I just purchased a cross 2 weeks ago and while I was cleaning/lubricating per instruction manual before shooting the rifle, I seem to remember the instructions had some specific details for lubricating the bolt/firing pin/spring and cold weather conditions. May be worth a look.
I also had problems with my lab radar especially when using directional muzzle brakes. Then one day I came across the jkl precision lab radar trigger. https://jklprecision.com/product/labradar-trigger/ All my problems were resolved using this device. Initially you need to determine the trigger...
The formula for converting mil to moa is as follows for your scope: 295 cm/3.4377moa per mil = 85.813 moa So your scope has 85.813 moa of elevation adjustment top to bottom Half of the elevation is centered top to bottom so you have 85.813/2= 42.9 moa down available from centerline of scope...
Those scopes are worth their weight in gold. Hidden gems for sure. I have one and highly reccomend them. Make sure the rifle you mount it on doesn’t have a canted rail as they are tuned to look through the center of the objective and have a very low amount of elevation travel (23 moa ish). I...
I’ve been extremely interested in a set of these for a while but really know nothing about them. I have a buddy that has the 10x42hdb. Are these comparable?
Self chambered shoots bugholes all day long with factory hornady 143 eldx. It’s my favorite stick in the safe! Night time she rides a Flir PTS 536 for critter gettin 😁