Search results

Thanks, I just saved 15% (I mean dollars) at Geico (I mean midway) 14THANKU15 worked today

Yes they will bounce around. The trick is to be as consistent as you can with your operation of the press Sent from my SAMSUNG-SGH-I537 using Tapatalk

I have seen a few and my brother has seen a lot of piebald deer. They are common in central NJ. Its a genetic thing so it varies by area.

I agree with strike, there will always be some movement. Read up on internal balistics. You would be amazed as to how much movement is going on before the bullet leaves the barrel.

40xs is correct, its not a mater of focus. In fact all of my shooting with these special glasses was with iron sights. The issue is the lens of standard glasses, or any optic as far as that goes is "correct" in the center and not as good near the edges. Therefore you should be looking through...

I use special glasses, my eye doctor is kind enough to let me bring in a rifle and get the center of the optic where it needs to be. Take a look at these CHAMPION SHOOTING GLASSES SYSTEMS Another brand is knob-block

Bryan I am taking a graduate course on external ballistics with Dr Carlucci. We were discussing your program, does it use Siacci tables? Thanks

Sawman I see you are from NJ and I am guessing that's what prompted this design. The biggest advantage that I see to this design is for use with barrels that have welded on flash hiders. This would allow you to change a barrel without having to "remove" the flash hider. I would like to see...

Absolutely beautiful! Are you going to make drawings available?

Check the DIAMETER of your expander, maybe they put the wrong one in, it should be a little less than .308

Any good shooter with a mediocre rifle can out perform a mediocre shooter with even a GREAT rifle. This is true, no mater what kind or rifle, pistol, shotgun, etc. A 12 inch plate placed at 600 yards is 2 MOA. Just about every high power rifle from the factory will hold 2 MOA assuming its a...

I use lc 308 match brass all the time. NEVER had a problem. Can you post a picture?

Read Brian Litz's article "Whats Wrong with the .30 caliber?", you will see that he likes the 7mm Recreational Articles | Applied Ballistics, LLC

If you have a milling machine, get a piece of 1" hex stock and cut it down flat so it fits in the bolt ways leaving one end in tact, take a look at these and you will get the idea...

Does anyone know of anybody who makes custom length Remington 700 style bolts? I contacted PTG and they do not. I have a R700 clone action that I need a new bolt for and it is longer than a short action and shorter than a long action. The company that made it doesnt exist anymore. If I...

These guys are in upstate NY Long Gun Training I havent taken their course but I did talk to them. They seem reasonable

Texar The action I am using is a non-remington, with a much larger OD receiver, but it uses a remington bolt. The barrel I am going to use is off of an Armalite AR-30 338 LM. The action is going to be single shot ONLY with a solid bottom so I am not worried about feeding or magazine length. So...

Can a Rem 700 bolt face be opened up enough to handle the 338 Lapua Mag? I am pretty sure the 700 is available in 338 LM but it looks like there would be a very small rim around the edge. If anyone has a Rem 700 in 338, could you please post a picture of the bolt face? Thanks

Please, were did you get the stock. I have one but I bought it 20 years ago at Camp Perry and dont remember who made it.

I just got the birthday notice last week and used. It worked fine but was not obvious at first. The special prices show up in red and say birthday price