Search results

Did you ever end up running these side by side? What were your thoughts?

Finally got around to measuring my McMillan rail - 0.75"W X 0.375" D X 11" L . Just based on a quick calc on the density I am assuming the dimensions are really close. Would you mind sharing the dimensions of your rail?

Cool, Probably a dumb question, but how close is this in dimensions to a McMillan Anschutz rail?

My TL3 broke the firing pin and cross bolt at 4100 live rounds, probably 10k dry fire. Zermatt sent me a whole new firing pin assembly and cross bolt free of charge. I now use my broken firing pin for dry fire.

What is your process for achieving the consistent neck tension ? Mandrel ? Annealing ?

Bringing this back in hopes you know which height of mount you are using for your B25, is it the 1.060" or the 1.125"? I'm trying to figure out if the B25 will fit in the 1.060". Thanks

What powder are you running through the Dillon?

@XLR @XLR Industries What about an inlet for de-bonded Accuracy International short actions? Similar to what MPA did with the BA chassis.

USO posted this on the gram, looks interesting.

There is some good info on this subject on the Autotrickler site in the blog section. https://www.autotrickler.com/blog/practical-statistics-for-shooters

Are you guys using the 'pull in with your bicep; method when shooting off barricades? Like for example the typical PRS barricade that you can lean into with a game changer type bag.

I am not an expert, but I had a 300 WSM built on a short action this year, with intentions to shoot 215 berger hybrid. I think that you want a SAAMI spec chamber if running on a short action at mag length. My rational is that the SAAMI chamber basically has zero freebore, which is good because...

Don't want to hijack, but which Kestrels can you use the DSF for with 22lr ammo? I have a 4500 AB and I cannot get it to work, as in it will only accept one entry.

I agree, this has also been my experience .

I agree it gets a bit crazy in the middle, it is not the optimal 'PRS' reticle, I get the feeling that they designed as more of a practical reticle that could be used in lower light / dark backgrounds and not get washed out. When you run the scope a 3x with the illumination only the center...

I watched those videos as well and just tested my 3-24x52 this weekend, it seemed to track perfectly to 20mils. Not really clear and defined but I just snapped this the other night at the range holding my phone behind the scope. FML-T1 between 12x and 15x on the zoom ring. Target at 400m. I...

AEM precision in Montana makes one as well, I have one and it works great. http://www.aemprecision.com/11-second-action-cover/

I just broke in a 6 creed benchmark and after about 150 rounds I gained 90 fps.

Looking at the Nosler data above the Long Range Accubond bullet they are using is 1.550" long and they show a OAL legnth 2.860, so I think at 2.950 in a AICS mag you could still get decent velocity out of long bullets.

@XTR what reamer specs are you planning on going with? I am not an expert when it comes to reamers but from what I can tell a SAMMI would be about as good as gets if running out of the AICS mags. As far as I can tell it has zero freebore, which I think would be the best possible solution with...