Search results

41.8 will shoot but slow I hit a flat spot between 42.4 and 42.7 of Varget 43 GRS of Varget shot a nice clover leaf but numbers aren't great so I could try playing with seating depth to close the group up or shoot 43.2 and see what happens. These are loaded 50 off at a OAL of 2.800. I started...

On 308 load development would you just start your seating depth at factory specs or something different? For instance if your rifle shot FGMM 168 which is seated at 2.800 and it's jumping let's say 40 thou would you start load test at that seating depth?

Forster FL size Lapua Brass These loads grouped ok but I know it can be better. Here's the numbers from today so I'm wondering whether to play with charge weight or seating depth to increase accuracy and numbers.

Looking to buy some Sierra 308/150 SBT’s #2125 Thanks

I'm thinking H4895 Whats your thoughts?

Want to buy some #3033 bullets or if you have some other hunting bullets 150GR let me know what you have.

Does anyone know if Tikka still makes these rifles? Trying to find one for my wife for hunting in 6.5 Creedmoor Not the CTR

Just need a 243 Win FL die. Prefer forster or RCBS

As the title says. Looking for new brass, winchester would be fine.

Started working on a load for wifes rifle. Once fired FL sized brass H414 powder Hornady 100GR PSP bullets Win Primers Gun shot like shit because I was getting velocity spreads 175 to 250 FPS Labradar. Never seen any spreads like that in anything I've loaded. Checked for carbon ring and nothing...

Which powder is good for 100GR Hornady hunting bullets? I have Win 760 H 4350 H 414 IMR 4064

Opened but new Zeiss V6 Throw Lever $50.00 Plus shipping lower 48 Vortex 30MM Bubble Level Used Good Condition $20.00 Plus Shipping lower 48

Anybody ran into this before? I FL size and then run a 262 expander mandrel using imperial or Forster case lube. I always lube inside of the neck before using the mandrel. Sized some cases today and ran into this on 5 times fired brass. I use this same method on all the calibers that I reload...

I ordered some and wanting to get some feed back from who ever shoots them in 6.5Creed. I'm going to do my own load workup but was wandering where y'all were finding accuracy nodes with them using H4350 and how far you were jumping these bullets. I have about every loading manual out there...

Would like to buy some 4064. I know shipping is a problem so I'm in GA. Or if anybody knows where there's some in stock would be appreciated.

Got it back a couple weeks ago and am very pleased with the build. Used a smith in Screven Ga that came highly recommended and couldn't be more satisfied with the out come. AO was going to build it but they closed up and was going to send it to some other smith's that I have used on other builds...

All there Gen3's are 20% off this weekend. Just thought I would pass it on if anybody needs a break.

I'm building a hunting rifle and am thinking about putting one of there breaks on it and was wondering if anybody has had any experience with them. I'm wanting to stay with a radial break and not a ported break.

Looking to install a break on a T3 Lite. It's 625 at the muzzle. What would be the correct thread pitch on that small of a barrel? It's a 300WSM

How do most of y'all set the trigger mode when shooting a bolt gun? I have mine set on trigger mode like the instructions say. Never tried it on doppler mode.