• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Suppressors 10mm fans chime in

Re: 10mm fans chime in

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ChadTRG42</div><div class="ubbcode-body">Thanks for the comments guys! I, too, love the 10mm. I've got a G20SF and G29SF.

I've worked up a great load with the 200 grain Hornady XTP. I was pushing it 1190 fps (avg) out of my bone stock G20 and it shot great at 25 yards and function 100%.
I am also working up a load with the 150 grain Nosler JHP. The first time out, I didn't get the results I had hoped for with the 150 JHP, so I am still working on that bullet. I'm playing with different powders to get good speeds and still feed/eject 100%.
I'll be loading up more of the loads I liked and testing them in my G29 and a Colt Delta Elite 6" to get velocity and group info.
Thanks, again!


http://www.dallasreloads.com/0-10.aspx?$1=1733 </div></div>


Whats your Brass look like? I tried an aftermarket barrel in mine. Too many malfunctions. Went back to stock, 100% reliable. But all my Brass comes out with the "Glock Smile". Nice bulge near the base of the case.
frown.gif


I use my 20 for woods carry. Couldn't see packing a 1911 in the woods. They are nice, but the 20 is easier to clean up.
smile.gif
 
Re: 10mm fans chime in

My 2 favorites. I have a 10mm conversion for only one of them. Both hand built by John Lim of Limcat Custom. They're shooters. Built on STI frames I've been sitting for years. 10mm handload is XTP 200 over AA#9 at 12 grains. My 6 incher, not pictured, 155 XTPs with 13.5 grains of blue dot.

[img:center]
9jlqww.jpg
[/img]