Has anyone loaded/shot any 125 grain bullets out of a Rem 700 with a 1/12 twist? If so, how did they work out?
I'm wanting to work up a load for coyotes and smaller game.
I'm wanting to work up a load for coyotes and smaller game.
- Thread starter SOBRYDEL
- Start date
Re: 125 grain .308 loads
https://snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1182812
there is a "snipershide" google search 3/4 down right side of EVERY page on this forum, give it a try some time
https://snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1182812
there is a "snipershide" google search 3/4 down right side of EVERY page on this forum, give it a try some time
Re: 125 grain .308 loads
IMR 3031 from 36 to 42 worked real well in my 308. the 36 gn load with the Speer 125 TNT is like shooting a 7.62/39 powder puff load. Haven't pushed higher loads as I was trying to see how low I could go with this combo. It all shot fine.
IMR 3031 from 36 to 42 worked real well in my 308. the 36 gn load with the Speer 125 TNT is like shooting a 7.62/39 powder puff load. Haven't pushed higher loads as I was trying to see how low I could go with this combo. It all shot fine.
Re: 125 grain .308 loads
Looking back through my notebook, I worked up this load about 14 years ago for my 700 PSS.
51.5 gr of Win 748
125 TNT
Lake City case
Fed GM210M primer
I fragged some ground squirrels with it to 350 yards.
Looking back through my notebook, I worked up this load about 14 years ago for my 700 PSS.
51.5 gr of Win 748
125 TNT
Lake City case
Fed GM210M primer
I fragged some ground squirrels with it to 350 yards.
Re: 125 grain .308 loads
125g Nosler Ballistic Tips with 48g Ramshot Tac.
No idea how fast they were going but had a 4 shot group at .477" / 100 yards during load development. Haven't tried them any further.
This was out of a Rem 700 AAC-SD 1/10 twist.
They were originally loaded for my Win Model 88 but never got around to testing them.
125g Nosler Ballistic Tips with 48g Ramshot Tac.
No idea how fast they were going but had a 4 shot group at .477" / 100 yards during load development. Haven't tried them any further.
This was out of a Rem 700 AAC-SD 1/10 twist.
They were originally loaded for my Win Model 88 but never got around to testing them.
Similar threads
