210 gr berger vld data

[rockybrashear]

hey i need a good starter load for some 210gr berger match grade vlds in a 300 win mag. anybody got anything?

 

[ChadTRG42]

Re: 210 gr berger vld data

if you email Berger, they will get you all the data you need. If your email was in your profile, I'd send you some.

 

[h2osport]

Re: 210 gr berger vld data

I am running H1000 at 80.1 grains with the 210vld with great results. Running at aprox 2980fps. I do not have my length, but they are on the long side. Recommend you start well below this and work your way up.

Randy

 

[jrob300]

Re: 210 gr berger vld data

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: h2osport</div><div class="ubbcode-body"> I am running H1000 at 80.1 grains with the 210vld with great results. Running at aprox 2980fps. I do not have my length, but they are on the long side. Recommend you start well below this and work your way up.

Randy </div></div>

Wow, sounds hot. What length barrel? In the lands? Distance from lands?

John

 

[MBrown]

Re: 210 gr berger vld data

I use Reloder 22, 73.5grn, win brass,& GMM215 primer seated to lands. Get about 2830 fps in Remington sendero 26" barrel. This is max load for my gun. Work your way up carefully!!!

 

[rockybrashear]

Re: 210 gr berger vld data

thanks a lot guys ive been emailing berger for days with no reply so this is a big help.

 

[Bigwheels]

Re: 210 gr berger vld data

I have used both H-1000, & H-retumbo with the 210 Berger.
Win cases
WLRM primers
Either 78.2gr H-1000 for 2940fps. Or 76.0gr. Retumbo for 2950fps.
Moly'd 210 VLD seated to 3.6"(.002" OFF the lands)
I found the Retumbo was dirtier than the H-1000, so I only use that now.