22 Creedmoor load data

Sleepertruckguy

Private
Minuteman
Aug 25, 2019
17
4
6
here is all my data so far. Please work your own loads every rifle is different. These are the loads I have shot from my rifle.
  • 26" Prefit bartlein barrel (1/7.5 twist)
Brass (a mix between hornady 22 creedmoor and gunwerks 22 creedmoor) All brass has been sized to 1.910"
Primers- CCI Br-2 (LRP)
All bullets have been seated .005 from lands
All Average speeds have been taken from a 5 shot group

Hornady 73g Eld
  • 41g H4350 (3545 fps)

Hornady 75g Eld
  • 40g H4350 (avg 3319 fps)
  • 41g H4350 (avg 3423 fps)
  • 40g Superformance (avg 3165 fps)
  • 41g Superformance (3249 fps)
  • 40g H100V (3304 fps)
  • 41g H100V (3379 fps)
Hornady 80g Eld
  • 41g H4350 (avg 3467 fps)
  • 42g H4350 (avg 3500 fps) *brass showing signs of pressure* (how ever this load is EXTREAMLY accurate for my rifle)
Nosler 70g RDF
  • 40.5g H4350 (avg 3544 fps)
85.5 Berger
  • 40.5g H4350 (avg 3366 fps)
80g Berger VLD
  • 37g Relaoder 23 (avg 3208 fps)
  • 37.5 Reloader 23 (avg 3215 fps) ***tightest group***
  • 37g H1000 (avg 2984 fps)
  • 37.5 H1000 (avg 3040 fps)
  • 38g Shooters World 4350 (avg 3071 fps)
  • 38.5g Shooters World H4350 (avg 3094 fps)
  • 37g H4831SC (avg 3056 fps)
  • 37.5g H4831SC (avg 3094 fps)
  • 38g N555 (avg 3182 fps)
  • 38.5 N555 (avg 3183 fps) ***EXTREAMLY ACCURATE and ZERO pressure signs*** will be cranking this load up and will update on speed/pressure
  • 40g H4350 (avg 3436 fps)
  • 40.5g H4350 ( avg 3472 fps)
  • 41g H4350 (avg 3506 fps) some ejector swipe marks *some signs of pressure* (VERY accurate load for my rifle)
80.5 Berger Fullbore Target
  • 40.5g H4350 ( avg 3476 fps)
  • 41g H4350 (avg 3512 fps)
75g Berger VLD
  • 40.5g H4350 (avg 3531 fps)
  • 41g H4350 (avg 357 fps)
77 Berger OTM tactical
  • 40.5 g H4350 (avg 3564 fps) bullets broke apart before 100 yards
  • 41g H4350 (avg 3578 fps) bullets broke up before 100 yards
73g Berger Boat tail Target
  • 40.5g H4350 (avg 3585 fps)
  • 41g H4350 (avg 3616 fps)
 
Last edited:

gunrunner69

Private
Minuteman
May 28, 2020
4
0
2
Thanks Truckguy you have given almost exactly what I need. I’m working with 88gr ELD MATCH but I can figure that out. Still waiting on an X Caliber prefix barrel for a Savage
 

gunrunner69

Private
Minuteman
May 28, 2020
4
0
2
Great now there are 3 or 4 of use playing with a wildcat. Problem is it’s not my rifle I’m building it for a friend. However I will get to do the break in on it
 

gunrunner69

Private
Minuteman
May 28, 2020
4
0
2
Ok here goes. It’s a simple build we’re using a chassis and action from a Savage 10 Stealth has a new Basix trigger and waiting for an X Caliber pre fit 22 inch 7 1/2 twist stainless cryogenically treat barrel.88gr Hornady ELD match Gunwerks 22 creed brass and Hornady 6.5 necked down. That’s about the size of it. Just waiting for the barrel so break in cat start.