I can’t seem to find any Varget. I have H4350 and XBR 8208. H4350 seems a tad slow but I see some guys are using it. Has anyone tried 8208? I’m hoping to run the 88 eldm in a 22” Brux.
- Thread starter ScottH6x47
- Start date
8208 is certainly worth a try. I run H4350 almost exclusively.
What kind of speed are you seeing with 4350?
I’m running the 75 eldms and alpha ocd dasher brass.
Wow, do you remember what freebore? I started at 31 grns and worked up from there got a pretty stiff bolt and pressure signs at 34 gns. Velocity was right at 3100.
What load did you end up using with your 22 dasher? I’m looking to work up a load for 88 eldms and 75 grainers.
At the moment I’m running 31.9 grns or SW precision and the 88 eld. Velocity is around 3175.
Old post but figured I would add.
88 to 95 grain bullets in my 22 dasher like 32 grains of varget.
3140 fps with 90 and 95. 3180 with 88. This is with a 26” 6.5T barrel.
Had the 88 over 3300 fps with varget but it wasn’t a sustainable load. Brass was taking a hit.
88 to 95 grain bullets in my 22 dasher like 32 grains of varget.
3140 fps with 90 and 95. 3180 with 88. This is with a 26” 6.5T barrel.
Had the 88 over 3300 fps with varget but it wasn’t a sustainable load. Brass was taking a hit.
Running 88s at 3080 is a happy spot.
