- Thread starter smadam78
- Start date
Re: 223 loads for 1-8 twist
What bullet?
What bullet?
Re: 223 loads for 1-8 twist
At minimum, I shoot 75 Amax in the 8 twist. I prefer the 77SMK and the Berger 80 VLD in them. The Berger is my bullet for out to 1000 yards with the 8 twist. My powder is currently AA2520 but working on developing a LR load for 2000MR powder. I will not pass along the charge weights as both are well above what is listed in published data.
At minimum, I shoot 75 Amax in the 8 twist. I prefer the 77SMK and the Berger 80 VLD in them. The Berger is my bullet for out to 1000 yards with the 8 twist. My powder is currently AA2520 but working on developing a LR load for 2000MR powder. I will not pass along the charge weights as both are well above what is listed in published data.
Re: 223 loads for 1-8 twist
with a 24" barrel
my load was 77gr smk, 24.4gr varget, win sr primer, LC brass
with a 24" barrel
my load was 77gr smk, 24.4gr varget, win sr primer, LC brass
Re: 223 loads for 1-8 twist
Best accuracy for 80 VLD came from 2000MR but AA2520 is still the best if you want to go longer (1000 yards). I get just over 100 FPS (2855 v. 2980) more with AA2520 than 2000MR and that can make a lot of difference. These numbers are from a 1 in 8 Krieger at 26".
Best accuracy for 80 VLD came from 2000MR but AA2520 is still the best if you want to go longer (1000 yards). I get just over 100 FPS (2855 v. 2980) more with AA2520 than 2000MR and that can make a lot of difference. These numbers are from a 1 in 8 Krieger at 26".
Re: 223 loads for 1-8 twist
My go to load for 1:8 twist target shooting is 75bthp hornady, 24.3 varget, LC/Rem/PMC brass, and CCI reg primer @ 2.25max COAL
My go to load for 1:8 twist target shooting is 75bthp hornady, 24.3 varget, LC/Rem/PMC brass, and CCI reg primer @ 2.25max COAL
Re: 223 loads for 1-8 twist
75 VLD, jump it .035, any case any good primer, and 24.2 H4895
75 VLD, jump it .035, any case any good primer, and 24.2 H4895
