223 loads with Ramshot x-terminator

[hawkinpup]

Anyone have any loads that they use with Ramshot x-terminator? I have about ten pounds of this stuff and would like to use in my AR. I have about 2k of 62 grain bullets to load up and I was looking to see if anyone had used these components. Any advice, opinions, etc. would be helpful.
Thanks

 

[ChadTRG42]

Re: 223 loads with Ramshot x-terminator

I have used it in 55 FMJ and 60 grain V-max loads. It is a good clean powder. It's best with lighter bullets, but will also work with the medium weight one's also.

Here's Ramshot's data for a 62 grain in 223 Rem. If you are running a 5.56 NATO chamber, you can go a little higher in charge weight over max.
X-Terminator 62 BRG HP
Start 21.3 @ 2,784 fps
Max 23.7 @ 3,098 fps

 

[hawkinpup]

Re: 223 loads with Ramshot x-terminator

Thanks, I tried ramshot x-terminator in my AR with 21.5 grains. behind a 62 gr. FMJ and it is smooth operating and quite accurate.