I can't find any data for a 87 v-max load with varget, I was wondering if anyone else uses this combo, if so whats your load, any help will be appreciated.
Thanks
Thanks
- Thread starter HOMELESSRDP
- Start date
Re: .243 87 V-Max
I have only loaded 87 grainers with IMR 4350 (40 grains) because it worked so well I didn't bother to try varget. I did find several loads online from other people and it sounded like 36-37 grains was where they got the best results. Makes sense, it's just 2 grains short of my load for the 75 grain v-max, which is pretty close to a starting load. If I did try varget I would still start at 34gr and work up since that's the 90 grain bullet data from Hodgdons site. If I try it I'll let you know. I'd be interested in hearing about your results as well.
-John
I have only loaded 87 grainers with IMR 4350 (40 grains) because it worked so well I didn't bother to try varget. I did find several loads online from other people and it sounded like 36-37 grains was where they got the best results. Makes sense, it's just 2 grains short of my load for the 75 grain v-max, which is pretty close to a starting load. If I did try varget I would still start at 34gr and work up since that's the 90 grain bullet data from Hodgdons site. If I try it I'll let you know. I'd be interested in hearing about your results as well.
-John
Re: .243 87 V-Max
.243, 23" barrel, 87 gr soft point Copper jacketed bullets, 45 gr H4350, 2.570"
OAL, not jammed into the lands
3137 fps measured, Quickload predicts 3148 fps, 58 kpsi
.243, 23" barrel, 87 gr soft point Copper jacketed bullets, 45 gr H4350, 2.570"
OAL, not jammed into the lands
3137 fps measured, Quickload predicts 3148 fps, 58 kpsi
