260 remington possum hollow bore guide
- Thread starter Sprayed99
- Start date
Re: 260 remington possum hollow bore guide
It's probably covered under 6.5mm since a 260 is 6.5mm.
It's probably covered under 6.5mm since a 260 is 6.5mm.
Re: 260 remington possum hollow bore guide
you can use either their 243 or .308 bore guide, both will work fine.
hope this helps.
you can use either their 243 or .308 bore guide, both will work fine.
hope this helps.
Re: 260 remington possum hollow bore guide
I just looked for myself and they do leave you kinda lost for 260. If I run into one of the old timers at the range I'll ask them as they know all about this sorta stuff. It's probably like attherange says. Mine has worked great for 7mm08 and 308, but I've never tried it on a 260.
I just looked for myself and they do leave you kinda lost for 260. If I run into one of the old timers at the range I'll ask them as they know all about this sorta stuff. It's probably like attherange says. Mine has worked great for 7mm08 and 308, but I've never tried it on a 260.
Re: 260 remington possum hollow bore guide
308 or 243 will work for 260. It works off the parent case of the 308. The neck does not come into play with the bore guide
308 or 243 will work for 260. It works off the parent case of the 308. The neck does not come into play with the bore guide
Re: 260 remington possum hollow bore guide
I bought a universal Gunslick model that was less than 20 bucks. It works just fin for my .260, .223, and .308. It has different chamber end attachment so you can make about anything work.
I bought a universal Gunslick model that was less than 20 bucks. It works just fin for my .260, .223, and .308. It has different chamber end attachment so you can make about anything work.
