270 wsm
- Thread starter Waknstak
- Start date
I shoot a Browning Abolt eclipse M1000 in 270 Wsm...shooting 1/2 MOA at 500 yds with Nosler brass, 140 gr accubond, 68 gr MagPro, and WLRM primers. Shoots equally as well with 58.5 gr IMR 4350.
Winchester Featherweight.
Safe in my rifle but be sure to work up.
66gr H1000 150gr Nosler Partition
66gr H4831sc 130gr Nosler Accubond
Both in Winchester brass and CCI 250 primers.
Safe in my rifle but be sure to work up.
66gr H1000 150gr Nosler Partition
66gr H4831sc 130gr Nosler Accubond
Both in Winchester brass and CCI 250 primers.
Safe in my two rifles, ymmv:
Winchester case
72.0 grains Retumbo
CCI 250 primer
130-grain Berger VLD
mv (in my rifles across and Oehler 35P): 3327 fps
This has been my go-to hunting load for several years. Sub-moa in my rifles (Winchester 70 and a NULA M28). This would not be my first choice for elk, as the Berger hunting bullets are a bit soft, but it's excellent for deer and pronghorn. If elk is on the itinerary, try a TSX bullet.
Winchester case
72.0 grains Retumbo
CCI 250 primer
130-grain Berger VLD
mv (in my rifles across and Oehler 35P): 3327 fps
This has been my go-to hunting load for several years. Sub-moa in my rifles (Winchester 70 and a NULA M28). This would not be my first choice for elk, as the Berger hunting bullets are a bit soft, but it's excellent for deer and pronghorn. If elk is on the itinerary, try a TSX bullet.
