300 PRC in AXMC
- Thread starter nexusfire
- Start date
Mine shoots excellent, I shipped LRI a 1.350" tenon bartlein gain twist blank. 30" heavy palma, 9.5 to 8.5 gain twist.
Mile High has win tac 300 PRC barrels in stock...
www.milehighshooting.com
Mile High has win tac 300 PRC barrels in stock...
Accuracy International AXSR/AXMC Barrel: 300 PRC, 26" - 5/8x24, Black-B
Factory Accuracy International Barrel, chambered by Win Tactical. Bartlein Steel blank.
www.milehighshooting.com
Last edited:
Tooley did a 27" for me. This is the 3rd PRC barrel he has done for me and they have been all amazing. But this is the first AXMC 300prc prefit I've done.
Mile high has some as shown above.
Tooley has another chambered one on the shelf I believe. Pick the length (27 or less) and barrel threads, and color for cerakote.
Mine slings the 215s at 3038ish with RL26 so far.
Mile high has some as shown above.
Tooley has another chambered one on the shelf I believe. Pick the length (27 or less) and barrel threads, and color for cerakote.
Mine slings the 215s at 3038ish with RL26 so far.
Attachments
Why not just do 300 Norma and have factory AINA or Proof SS barrels and Lapua brass at your disposal?
Or go Norma like redneckbmxer24 states.
AINA and proof are both doing prefits for Norma and PRC now. In the two new 27" norma and PRC barrels I just briefly pressure tested. I got 3047 fps with the 215s on the Norma behind 86gr of retumbo. And 3038 fps with the PRC behind 76.9 gr of RL26. Haven't shot the 230s yet in either so cant comment on that. The norma is going to give you some more juice on the heavier pills.
PRC has ADG and Hornady Brass
Norma has Peterson, Lapua, Norma, ADG, Hornady, etc.
If you only have the Mag Bolt face and mags and want to sling the 215s, the PRC is going to do it just about as well. If your going heavier to the 250s and want even faster with the 230s, the Norma is going to give you the edge. They both will get you to 2000 plus yards and do it well.
AINA and proof are both doing prefits for Norma and PRC now. In the two new 27" norma and PRC barrels I just briefly pressure tested. I got 3047 fps with the 215s on the Norma behind 86gr of retumbo. And 3038 fps with the PRC behind 76.9 gr of RL26. Haven't shot the 230s yet in either so cant comment on that. The norma is going to give you some more juice on the heavier pills.
PRC has ADG and Hornady Brass
Norma has Peterson, Lapua, Norma, ADG, Hornady, etc.
If you only have the Mag Bolt face and mags and want to sling the 215s, the PRC is going to do it just about as well. If your going heavier to the 250s and want even faster with the 230s, the Norma is going to give you the edge. They both will get you to 2000 plus yards and do it well.
Damn same speed with 10 grains less powder! That's awesome
I'm sure if I used the n570 or whatever it is with the norma it would be more also. But Retumbo in Norma and RL26 in the PRC are close for a 27" tube.
Then that sounds like a good reason to complete the full kit.
Correct. Fits and feeds perfect, and at least with the reamer LRI used on my barrel there's probably 0.125" more room in the mag to chase the lands if needed.
Last edited:
I’ve got a longer barrel on my f open gun which is in 300PRC. I’m not stepping on the loads but 225’s, 230SMK and 230 ATIP’s are coming out at a honest 2900fps. Yes it can go faster.
I almost did the 300 Norma but I weighed having a larger bolt face vs the standard mag and pretty much the same performance with the PRC vs the Norma with burning about 10gr less powder that did it for me.
Later, Frank
Bartlein Barrels
I almost did the 300 Norma but I weighed having a larger bolt face vs the standard mag and pretty much the same performance with the PRC vs the Norma with burning about 10gr less powder that did it for me.
Later, Frank
Bartlein Barrels
