.338 250gr Projectiles and Load Data

[hugo121175]

What 250gr bullets have you guys been trying to reload .338 Lapua Mag? I'm starting to reload 250gr Lapua Scenar's for my Sako TRG. The Sako has a 1:12 twist, and that is why I'm going with the 250gr. I am just wondering what results everyone else has gotten. I would like to keep my options open.

Thanx,
Hugo

 

[dksd39]

Re: .338 250gr Projectiles and Load Data

check this thread in the reloading depot--
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=348739#Post348739


here is my load for 250gr Lapua LB
94gr RL-25
250gr Lapua LB
Fed 215m primer
OAL- 3.69"
2920 fps- 26" barrel

 

[ChrisGarrett]

Re: .338 250gr Projectiles and Load Data

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: hugo121175</div><div class="ubbcode-body">What 250gr bullets have you guys been trying to reload .338 Lapua Mag? I'm starting to reload 250gr Lapua Scenar's for my Sako TRG. The Sako has a 1:12 twist, and that is why I'm going with the 250gr. I am just wondering what results everyone else has gotten. I would like to keep my options open.

Thanx,
Hugo </div></div>

250gr Scenar or SMK out of my TRG-42.

H-4831sc at between 86gr-88gr.

Federal GMM 215Ms.

Lapau/Norma brass.

.365" Redding TiNi bushing.

COAL: 3.730"

2825-2875 fps. Moderate velocities, but great out to 1022 yds.

Chris

 

[hugo121175]

Re: .338 250gr Projectiles and Load Data

Going to be starting reloading next week for this round. I figure I'll shoot five round groups with differant grain weight, and see how she does. I'll post some results then.

Thanx Guys

Hugo