Hey guys, so I was doing some measurements on my savage 110 ba 338 chamber and with 300gr bergers OTM's and it comes out to 3.827 , I thought a good place to start with loads would be .015-.020 off the lands but that won't even fit in the magazine. The magazine inside dimension is about 3.765, loaded to mag that would be just over .060 off the lands. Is that too far of a jump? Won't that start to erode the throat prematurely? Just trying to get this right. The other option I was thinking was to modify the front and back inside walls of the magazine to accept a longer cartridge, has anyone done that before?