I know there are a ton of threads to sort through regarding load data for this cartridge but I am very curious as to what guys are running with these combo's...at least with the H1000 and 300 grain pills...a guy needs a good starting point.
.338 Norma - H1000 and 300 SMKs
- Thread starter rowen99
- Start date
I'm pushing 88.7grn h1000 with a 300grn Berger otm at 2735fps with Fed mag match primers. Pm me your email and I'll send you a word doc of a pile of loads to start with.
Xdeano
Xdeano
Last edited:
89.0 gr H-1000 w/ Berger 300gr OTM 2790 fps from a 27" tube.
89.0 gr Retumbo averaged 2730
89.0 gr Retumbo averaged 2730
Last edited:
3.602
But obviously, ever reamer is gonna produce a little bit diff chamber. I'm told 338 Norma is pretty forgiving for COAL. IIRC I'm about 15-20/1000's off the lands.
But obviously, ever reamer is gonna produce a little bit diff chamber. I'm told 338 Norma is pretty forgiving for COAL. IIRC I'm about 15-20/1000's off the lands.
Hey garandman - curious what trim specs you are using. Got through 300 pieces of brass and just curious as to what trim specs u use.
Thanks so much - appreciate the feedback... I wish there was more published (formalized) information out there on this cartridge ...as I think it really performs well.
Similar threads
